Print Page | Close Window

Fresh Win 10 Install - USB Nor Recognized on Start

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1480
Printed Date: 24 Dec 2024 at 9:23am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Fresh Win 10 Install - USB Nor Recognized on Start
Posted By: Les
Subject: Fresh Win 10 Install - USB Nor Recognized on Start
Date Posted: 11 Dec 2015 at 10:35am
WE have had 4 of the new Z170 boards (2 Xtreme 7 and 2 Formula) with Win 10 installed and each have this recussing problem.  Once Win 10 is installed, each startup results in USB Not Recognized...error 43 and this is identified in Device Manager.  In checking closer, it appears to be the USB 3.0 XHCI Hub causing this where it does pick up initially on boot.

I have tried the USB patcher utility and don't understand if it worked or not.  I installed 2 Win 10 installation fresh after using the ASRock patcher to create the USB disk, and also through the Intel USP Boot program with the USB\ 3.0 Creator utility.  After both installations I still get this USB not recognized ON ALL SYSTEMS.

Am I doing something wrong?

I have also tried to refresh all USB drivers, turn power management off...etc...still same thing...on all systems.





Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net