My Pc :
Amd Threadripper 3960x
Cooler Master MASTERLIQUID ML360 RGB TR4 EDITION WITH RGB CONTROLLER
Asrock Trx40 Creator
32GB G-Skill 3800Mhz Cl 14-16-16-36
Super flower leadex platium 2000w
2x Zotac 980ti !i know old"
1x samsung 950 pro 512Gb nvme ssd
1x 2tb 850 evo 2Tb
7x seagate 4tb
Mad cats Keybord
Reddragon mouse 2400dpi
My question is that i got this Cooler Master MASTERLIQUID ML360 RGB TR4 EDITION WITH RGB CONTROLLER.
The pump is a 3 pin connector.
Radiator 360 got 3x 140mm fans on rgb with 4 pins PWM.
i also have 4 x fractal design prisma al-14/pwm 3x for intake front 1x outtake back all have 4x pwn
I have the pump from Cooler Master MASTERLIQUID ML360 RGB TR4 EDITION WITH RGB CONTROLLER on the CPU Fan Connector (CPU_FAN1).
Then i have connected the 3 fans that sits on the radiator to a y splitter pwn splitter and they are all connected after that to the CPU / Waterpump Fan Connector (CPU_FAN2/WP)
my Pc care have 3x pwn connectors build in so 2 of fractal design prisma al-14/pwm is connected to 1 of the case pwm each and the 2 others with a splitter to the 3rd pwm on the case then the case gives a pwn cable from that to my Chassis / Waterpump Fan Connector (CHA_FAN1/WP).
Is this done right? or should the pump be connected to the CPU / Waterpump Fan Connector (CPU_FAN2/WP)???
in the bios
CPU Fan Connector (CPU_FAN1) only haves customize/silent/standard/performance/full speed / No Pwm options altho its a 4 pin header
CPU / Waterpump Fan Connector (CPU_FAN2/WP) this have : customize/silent/standard/performance/full speed/pwm
Chassis / Waterpump Fan Connector (CHA_FAN1/WP) this have : customize/silent/standard/performance/full speed/pwm
dunno who cpu fan 1 dont have pwm snce is a 4 pin header on the mobo.'
Hope you can help me out here
|