AMD Motherboards - Update to 3.60 cannot boot into WIN10.

Print Page | Close Window

Update to 3.60 cannot boot into WIN10.

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=14828
Printed Date: 12 Aug 2025 at 9:55pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Update to 3.60 cannot boot into WIN10.

Posted By: Midna78
Subject: Update to 3.60 cannot boot into WIN10.
Date Posted: 30 Jun 2020 at 2:16pm

Hi.
I have A300 board and today update bios to 3.6; then system can only boot into bios instead of WINDOWS 64bit.
My SSD is 970 EVO NVME 500GB, seems like BIOS does not detect it as well. And I tried to flash back to 3.5 BIOS but no help.
Is there any solution can help to fix this situation? Thanks a lot!

Replies:

Posted By: ASRock_TSD
Date Posted: 30 Jun 2020 at 2:48pm

Dear Midna78,

Greetings, this is ASRock TSD.

According to your question, we provide some suggestions for verifying:

1. Please refer to user manual page.21 to clear CMOS.
http://asrock.pc.cdn.bitgravity.com/Manual/A300M-STX.pdf

2. Please boot into BIOS setup and check if the SSD can be detected under Advanced tab > Storage Configuration.

3. Under BIOS>Boot tab, please set CSM to enabled/disabled by turns to check if system can boot into OS.

4. If possible, please install another PCIe M.2 SSD.

Thanks!

All the best,
ASRock TSD

Posted By: Midna78
Date Posted: 07 Jul 2020 at 12:21pm

Sorry for the late reply.
I take it to dealer and they told us this M.2 is malfunction.
Replace a new one and so far so good.
Thanks the support.