AB350M - Ryzen 3600 issue
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=14918
Printed Date: 10 Aug 2025 at 7:45pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: AB350M - Ryzen 3600 issue
Posted By: Lambouk
Subject: AB350M - Ryzen 3600 issue
Date Posted: 12 Jul 2020 at 2:08am
Hi everyone.
I just swapped my son?™s Ryzen 1600 to a 3600 but it just won?™t post.
I turn it on and the fan starts but nothing else happens. I put the 1600 back in and everything works again. I?™ve even updated the bios to P5.90. Please please help.
Thanks
-------------
Ryzen 1700, ASRock killer x370 motherboard with bios P3.20, G.Skill Trident Z 16GB Kit DDR4 3200MHz RAM, 750w EVGA PSU, GTX 1080ti. All drivers up to date on windows 10.
|
Replies:
Posted By: Lambouk
Date Posted: 12 Jul 2020 at 1:33pm
Anyone?? Thanks
-------------
Ryzen 1700, ASRock killer x370 motherboard with bios P3.20, G.Skill Trident Z 16GB Kit DDR4 3200MHz RAM, 750w EVGA PSU, GTX 1080ti. All drivers up to date on windows 10.
|
Posted By: Hammerfest
Date Posted: 13 Jul 2020 at 3:31am
If you haven't already, with the 1600 in, and the BIOS updated, go into the BIOS, then load defaults, reboot, load back into BIOS, load defaults again, reboot, then power down, unplug power from wall, hit power button to discharge, then do CPU swap, and try again.
Stupid, weird, but SOMETIMES, it works...
Otherwise, you could have a fake 3600 or bad 3600 (both have happened before)
|
Posted By: Lambouk
Date Posted: 13 Jul 2020 at 4:12am
I tried that. But I flashed it back to the 1st bios that was for 3rd gen Ryzen Then it worked. So finally happy. Thanks.
-------------
Ryzen 1700, ASRock killer x370 motherboard with bios P3.20, G.Skill Trident Z 16GB Kit DDR4 3200MHz RAM, 750w EVGA PSU, GTX 1080ti. All drivers up to date on windows 10.
|
Posted By: Hammerfest
Date Posted: 13 Jul 2020 at 7:08am
could have been memory training depending on how long you let it sit
I know my first time it was a good 10min, but I have a pretty top end kit in my personal rig
|
|