Cannot boot into UEFI
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=15059
Printed Date: 20 Jul 2025 at 10:13am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Cannot boot into UEFI
Posted By: Szaki
Subject: Cannot boot into UEFI
Date Posted: 28 Jul 2020 at 12:52pm
| I meet a problem, the board AB350 K4 cannot enter to UEFI after choosing ultra fast boot option. Keep entering del or f2 but just no way to enter in. please help, I need to change other settings. |
Replies:
Posted By: Xaltar
Date Posted: 28 Jul 2020 at 12:58pm
|
You will need to do one of the following: 1. Install "Boot to UEFI" from your motherboard download page and run it 2. Clear CMOS using the jumper on your board to reset to defaults, this will disable ultra fast boot as well as restore defaults. ------------- 
|
Posted By: ASRock_TSD
Date Posted: 28 Jul 2020 at 7:06pm
|
Dear Szaki, Greetings, this is ASRock TSD. It is normal that when fast boot is enabled, system will not able to go into BIOS. If disable fast boot is needed, kindly refer to page 25 to clear CMOS. (Make sure to unplug the power cable before clear CMOS) http://asrock.pc.cdn.bitgravity.com/Manual/Fatal1ty%20AB350%20Gaming%20K4.pdf After clear CMOS, you will be able to load BIOS settings to the default and then enter to UEFI. Thanks! All the best, ASRock TSD |
Posted By: Szaki
Date Posted: 28 Jul 2020 at 7:11pm
| OKAY. thanks for the information. |