Ryzen 3600 boost speeds
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=15177
Printed Date: 26 Dec 2024 at 10:56pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Ryzen 3600 boost speeds
Posted By: AndersWSP
Subject: Ryzen 3600 boost speeds
Date Posted: 12 Aug 2020 at 5:50am
|
TL;DR X570 Phantom Gaming 4, Ryzen R5 3600 not hitting boost speeds. What gives? On and off I have been spending about 2 months tinkering with Ryzen CPU. But, currently in a heat wave (no AC) I decided that heat (and fan noise as a bonus) was the enemy, so I reconsidered the stable all core OC i had the machine running. Reset board to defaults, but reloaded XMP, left everything default/auto and used Ryzen master to limit the cpu to 44 watts. Unsurprisingly, this cost me a lot of R20 performance for multicore but that's kind of the point. I saw that the cpu for single core only boosted to around 4ghz with power (and PLENTY of thermal) budgets still to spare, which landed me at around 460-465 single core. Which is 'fine' but I was wondering if I could crank the 'juice' to have it boost single core boosts further. Mainly a gaming machine, after all. Maxing out all power sliders, double checking everything in the bios was left auto/stock allowed it to boost to 4.05 roughly. *technically* better but not really the earth shattering improvements I was looking for. Updated to newest bios (3.10) and now it boosts to 4.1 very infrequently but on average is now lower than before, (also the ram XMP profile I've been using so far stopped working, but that's a separate issue). Do I keep poking the board/cpu with a stick until something interesting happens, is there obvious settings I'm missing, or can the mobo/cpu combo simply not do this? (Side note, cpu will happily run 4,3 at decent voltages and be completely p95 stable. Also 4,4 is stable but it overheats in p95). Other than going back to all core OC'ing (through BIOS) I've no idea how I'm supposed to get the speeds out of the cpu that it's meant to do. ------------- Insert something funny. |
Replies:
Posted By: datonyb
Date Posted: 16 Aug 2020 at 12:12am
|
last system i built with a 3600 done single core 4200mhz and would hold all core at 4125 mhz simply set xmp and then PBO in bios but the system is using 4 120mm fans in case and a decent tower cooler with a 120mm fan temperature is the enemy with ryzen and its auto boosting ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |