Print Page | Close Window

Z87M Extreme4 can't update to 2.10 from P1.90

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1520
Printed Date: 24 Dec 2024 at 10:10am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Z87M Extreme4 can't update to 2.10 from P1.90
Posted By: philtrid
Subject: Z87M Extreme4 can't update to 2.10 from P1.90
Date Posted: 14 Dec 2015 at 10:00pm
Hello, my graphics card (GTX 770 4 GB) has started behaving odd with the Asrock motherboard, it intermittently will not output a signal to the tv/monitor. When I check the Asrock website I see there is an update for my mobo (Z87M Extreme4) that was released in May 2015. The latest UEFI version is 2.10. My current version is P1.90. The notes state 2.10 contains improvements to VGA compatibility so I figure this is a good chance at solving my problem. When I go to update the mobo to 2.10, it just does not work. If I try using a FAT32 USB and going to tools in the UEFI it just hangs. Likewise if I try to do it by pressing F6 at start screen, just hangs. I didn't try DOS method. I tried Windows 7 method (run as admin) and when it reboots it gets to the Asrock start screen where it says press F2 or del to enter UEFI menu and just hangs. I left it at that screen for 20 minutes, it does nothing. I have to turn the computer off, then it doesnt boot up at all, just stops at the Asrock start screen. I thought it was bricked but then I tried resetting the cmos jumper and thankfully that restored original P1.90 so I can use the computer again. I have tried heaps of times using USB and Windows to update to 2.10 but it just doesn't work... please help!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net