Bios updated successfully but stuck in boot loop
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=15200
Printed Date: 27 Dec 2024 at 8:52am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Bios updated successfully but stuck in boot loop
Posted By: CaptainSpen
Subject: Bios updated successfully but stuck in boot loop
Date Posted: 15 Aug 2020 at 8:43am
|
I recently updated the bios of a ab350m motherboard. I was on the bios version 1.20 and I went one update at a time to 3.20. Once I got to this version I tried updating to the next version available called 4.20. As a requirement of this update it ask for you to be on the bios version 3.20 which I was and to turn off and ftrn (something like that) inside the advanced bios settings. This setting was turned off. Now I did the update and it was successful, but when I turn on my pc it boots but before it reaches the bios screen it turn off. I cannot reach the bios screen. My pc spec: Ryzen 5 1400 Rx 590 32 GB DDR4 430w PSU If anyone know how I can fix this it would be appreciated. |
Replies:
Posted By: SkyForce6
Date Posted: 15 Aug 2020 at 9:02am
| Have you tried to boot with just 2 memory sticks for a total of 16GB of RAM? Your 4 sticks might be causing this instability. First gen Ryzen have poor memory support unfortunately! |
Posted By: CaptainSpen
Date Posted: 15 Aug 2020 at 9:03am
| Just tried resetting csmos battery and jumper but still nothing works. My pc leds fans light up and everything is working just cannot get past bios. I replaced the cmos battery with a brand new one but does the same thing. Is there anything I can do to save this? |
Posted By: CaptainSpen
Date Posted: 15 Aug 2020 at 9:04am
| Just replaced cmos battery and tried moving the jumper but still nothing works. Is there anything I can do to save it? |
Posted By: CaptainSpen
Date Posted: 15 Aug 2020 at 9:04am
| No I have not tried it. I only have 2 sticks though and both are 16GB each. |
Posted By: SkyForce6
Date Posted: 15 Aug 2020 at 9:05am
| Try to boot with just 1 stick then and see if that works... |
Posted By: CaptainSpen
Date Posted: 15 Aug 2020 at 9:09am
| Ok so now my pc stay on but I do not have any display. No bios screen is shown but at least it isn?™t turning off. Any other suggestions? |
Posted By: CaptainSpen
Date Posted: 15 Aug 2020 at 9:14am
| I GOT IT TO BOOT. LETS GOO POG CHAMP. CMOS JUMPER WAS ON WRONG. |
Posted By: SkyForce6
Date Posted: 15 Aug 2020 at 9:32am
Nice too see it was such an easy fix! 
|
CaptainSpen wrote: