Intel Motherboards - Asrock Fatal1ty H97 Performance

Asrock Fatal1ty H97 Performance

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1549
Printed Date: 24 Dec 2024 at 10:24am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Asrock Fatal1ty H97 Performance

Posted By: princewenle
Subject: Asrock Fatal1ty H97 Performance
Date Posted: 18 Dec 2015 at 6:02pm

Hi All,

Since i changed my motherboard to Asrock Fatal1ty H97 Performance, my mouse's light is always on, even after i shut down my PC.

Anyone can help me on this? Do i need to turn off the PSU power every time i shut off?

How to set from BIOS?

-------------
Just a Noob

Replies:

Posted By: princewenle
Date Posted: 19 Dec 2015 at 12:47am

Tried alot of method...

Nothing can solve this problem...

Found these in BIOS, does it connected to the mouse light?

1. Deep Sleep
Configure deep sleep mode for power saving when the computer is shut down.

2. Restore on AC/Power Loss
Select the power state ater a power failure. If [Power Of] is selected, the power will
remain of when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.

3. Good Night LED
By enabling Good Night LED, the Power/HDD LEDs will be switched of when the
system is on. It will also automatically switch of the Power and Keyboard LEDs
when the system enters into Standby/Hibernation mode.

In addition, might or might not related to above matter:

1. PS/2 Keyboard Power On
2. Allow the system to be waked up by a PS/2 Keyboard.
3. PCI Devices Power On
4. Allow the system to be waked up by a PCI device and enable wake on LAN.
5. Wake From Onboard LAN
6. Allow the system to be waked up by the onboard LAN.
7. Ring-In Power On
8. Allow the system to be waked up by onboard COM port modem Ring-In signals.
9. RTC Alarm Power On
10. Allow the system to be waked up by the real time clock alarm. Set it to By OS to let it be handled by your operating system.
11. USB Keyboard/Remote Power On
12. Allow the system to be waked up by an USB keyboard or remote controller.
13. USB Mouse Power On
14. Allow the system to be waked up by an USB mouse

-------------
Just a Noob

Posted By: Xaltar
Date Posted: 19 Dec 2015 at 1:15am

There is no way to turn this feature off, the motherboard remains "awake" so long as there is power to it and one of the effects of this is the optical sensor on the mouse will remain illuminated. A simple fix is to switch off the PSU when you are not using the PC and if it is awkward to reach you could try using a powered hub to connect your mouse then switch that off when your system is shut down.