Asrock H170m Pro4 with1.80 BIOS
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1557
Printed Date: 20 May 2024 at 9:10am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Asrock H170m Pro4 with1.80 BIOS
Posted By: h170m
Subject: Asrock H170m Pro4 with1.80 BIOS
Date Posted: 20 Dec 2015 at 2:09am
|
Hello guys! I have a few quick questions: 1. RAM OVERCLOCKINGCan it run my RAM at 2666Mhz? The Sport+ mode lowers the timings but it doesn't increase the Mhz.Right now I'm running on Comfort mode with custom timings and voltage: 11-11-11-28@1.2v (2133MHz) Anything below that and the PC won't boot. Are these results any food? Do you think I can improve anything?   2. CPU FAN SPEEDThe CPU fan is not spinning at all if it's set below 50%.At 10%, 20%, 30%, 40% the fan is not spinning at all. Is this normal? Silent, Standard, etc. won't help.I use Custom right now:  3. CPU VOLTAGECan I undervolt my CPU with this motherboard? What does CPU Offset Voltage (mV) do? What value should I try?Any suggestions are much appreciated! ------------- H170M Pro4 | i5-6600 | 2x4GB HyperX Fury 2666Mhz HX426C15FBK2/8 |
Replies:
Posted By: h170m
Date Posted: 04 Jan 2016 at 9:46pm
|
Is this the official AsRock support forum? Anyone? ------------- H170M Pro4 | i5-6600 | 2x4GB HyperX Fury 2666Mhz HX426C15FBK2/8 |
Posted By: keeka
Date Posted: 05 Jan 2016 at 3:35am
|
I don't believe you can run the memory faster than 2133MHz with H170. Regarding the cpu fan control, you're not alone and may be interested in this thread: http://forum.asrock.com/forum_posts.asp?TID=1392&title=h170mitx-dl-cpu-fan-control |
Posted By: Xaltar
Date Posted: 05 Jan 2016 at 5:37am
| The best you can do on the H170 chipset is tighten your timings which improves RAM performance significantly. The bench results you posted are very good for 2133 frequency. From what I have seen it seems that is exactly what DDR4 OC does though I do not have supported RAM to test the feature on my own H170 board. Sadly my Corsair Vengeance kit does not provide the option. |
Posted By: h170m
Date Posted: 05 Jan 2016 at 4:38pm
|
Thanks for the reply, guys! keeka, yes, we're all in the same boat with the CPU fan control problem. I'm still waiting for a solution to this hideous problem. Xaltar, can't you set your own RAM timings with the Corsair memory? If the AsRock Non-Z OC doesn't have a preset for your RAM modules, you should still be able to set your own timings. Anyone having any idea what the CPU Offset Voltage (mV) does and how it works? Can I undervolt my CPU on AsRock H170M Pro4? ------------- H170M Pro4 | i5-6600 | 2x4GB HyperX Fury 2666Mhz HX426C15FBK2/8 |