x470 TaiChi Ult Mem problems - Corsair Veng 3000
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=15596
Printed Date: 14 Aug 2025 at 10:53am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: x470 TaiChi Ult Mem problems - Corsair Veng 3000
Posted By: authorleon
Subject: x470 TaiChi Ult Mem problems - Corsair Veng 3000
Date Posted: 26 Aug 2020 at 2:53am
|
Hello, I have the following: - X470 Taichi Ultimate (BIOS 4.20). - Ryzen 9 3800x (12 / 24) I have the following RAM Module Manufacturer: Corsair Module Part Number: CMW128GX4M8C3000C16 Module Series: Vengeance RGB PRO I am only using 64GB ( 4 x 16GB). The sepecificaiton of the RAM is located below using Typhoon Burner.  I really need your help because I'm having some stability problems. I try to use the XMP profile in the BIOS. Let me explain the stability problems I am having. - I can run Intel burn test for over two hours with no problem, that is also including the GPU at 100%. So that is really stable. When I am in Windows everything is good so what is the problem. - Time to time when I turn on the computer. Buyers will reset and go back to factory defaults. - Other times, the red display shows up as 39. - Other times, the system restarts no less than three times before factory Reset. I'm pretty sure this is something to do with the RAM, Because of this post: http://forum.asrock.com/forum_posts.asp?TID=11792&title=taichi-x470-memory-problems-corsair-veng-3000 I would really appreciate it if I can get some help with this, I cannot change the Roundhouse don't have any money. I'm aware that I need to set the times manually which is perfectly fine. Please have a look at the image below, THANK YOU!!!!!! 
|
Replies:
Posted By: authorleon
Date Posted: 26 Aug 2020 at 2:54am
|
I would like to get it running at 3000MHz please. Thank you!!! |
Posted By: ThreeDee
Date Posted: 28 Aug 2020 at 11:03am
|
Corsair's are notorious for requiring just a smidgeon of more voltage .. so manually set to 1.36v and see if that helps with XMP ------------- |Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15| |
Posted By: authorleon
Date Posted: 30 Aug 2020 at 1:10am
|
Hello. Thank you very much for the information. I have tried exact what you have said but I get the same result. So let me explain the problem. When I power off the computer every thing is fine. When I powered on sometimes, It locks up and the BIOS reset back to factory defaults. The computer is very stable, running GPU, CPU and memory as 100% or over two hours no problem whatsoever. Is there something that I am missing. |
Posted By: cx5
Date Posted: 31 Aug 2020 at 9:20am
cannot use MANUAL, must find out your ram PCB chip layout A2 or A0 or ??? see example picture  ------------- x370taichi@3.50gen4 AX750 Optane900P SN770 3800x PosdonZro4 BarrowPWM-17w>420x140x28 XFX SWFT319 6900XT MSI RX560 LP to get Fluid Motion BlueskyFRC 75hz |
Posted By: authorleon
Date Posted: 31 Aug 2020 at 9:10pm
|
Hello, thank you for trying but I have given up on this board. Really. I have now sent it back. |