ASROCK RGB no working
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=16381
Printed Date: 11 Nov 2025 at 4:28pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ASROCK RGB no working
Posted By: flS347qF
Subject: ASROCK RGB no working
Date Posted: 25 Sep 2020 at 12:04pm
|
I have installed ASROCK LED utility with new win10 OS and the board is using just a month B450 Steel Legend. I try to change its color but no effect and it just light on and off repeatedly. Is this motherboard or utility problem?
|
Replies:
Posted By: ASRock_TSD
Date Posted: 25 Sep 2020 at 2:22pm
Dear flS347qF,
Greetings, this is ASRock TSD.
Regarding this problem, we suggest downloading the latest Polychrome utility and flash the RGB LED firmware manually, kindly refer to following steps.
1. Uninstall the ASRock Polychrome you are using in Control Panel and make sure the ASRRGB folder disappears.
2. Download ASRock Polychrome RGB ver:2.0.71 utility by below link and install it.
https://www.asrock.com/MB/AMD/B450%20Steel%20Legend/index.asp#Download
3. Type "CMD" in search bar and right click to choose "Run as administrator".
4. Go to RGB app installation folder by typing "cd C:\Program Files (x86)\ASRock Utility\ASRRGBLED\Bin"
5. Flash the RGB chip using the following command "WriteFW.bat"
After step 5, kindly wait about 30 sec and the FW flash will be finished.
Thanks!
All the best,
ASRock TSD
|
Posted By: flS347qF
Date Posted: 30 Sep 2020 at 2:48pm
Hey, i just want to say thank you.
Your SOP is very clear and now i can use the polychrome after flash the firmware.
ASRock is good!!
|
|