BeeBox N3150 Freezes at Asrock LOGO
Printed From: ASRock.com
Category: Technical Support
Forum Name: HTPC&Gaming Barebone&Others
Forum Description: Question about HTPC&Gaming Barebone&Others
URL: https://forum.asrock.com/forum_posts.asp?TID=1646
Printed Date: 11 May 2024 at 11:25am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: BeeBox N3150 Freezes at Asrock LOGO
Posted By: sunnysky2003
Subject: BeeBox N3150 Freezes at Asrock LOGO
Date Posted: 03 Jan 2016 at 8:32am
|
Hi, there, Just got beebox n3150 and have win7 installed, but all the sudden the system doesn't boot. It stops right at ASROCK logo screen (with F2,F6,F11 on the bottom right corner). Please help!! Thanks!!
|
Replies:
Posted By: wardog
Date Posted: 03 Jan 2016 at 9:12am
|
First, does pressing F2 get you into the BIOS? |
Posted By: sunnysky2003
Date Posted: 03 Jan 2016 at 1:25pm
|
No. It just freezes there. No buttons work. |
Posted By: wardog
Date Posted: 03 Jan 2016 at 5:39pm
|
Has it been behaving this way since out of the box, or did it function normally prior? And if it ran prior, for how long? ------- Are you knowledgeable and confidant of opening it up? |
Posted By: sunnysky2003
Date Posted: 04 Jan 2016 at 1:18am
|
Even though it hung during BiOS/UEFI few times, it was mostly ok. However, it freezes like this right after I installed Win7 64bit pro. I assembled many PCs myself. I installed Samsung 850 EVO series mSATA 250GB and 2x2GB DDR3L memory modules into the unit myself. In my perspective, the system stops (or has problems) loading BIOS/UEFI after Win7 installation. I also tried to take out one of the memory module, but still no luck. Anyway to refresh BIOS/UEFI in this state? |
Posted By: Xaltar
Date Posted: 04 Jan 2016 at 1:20am
| There are 2 contact pads labeled Clear CMOS, shorting them with the unit disconnected from the power might get you up and running again. |
Posted By: wardog
Date Posted: 04 Jan 2016 at 5:35am
This begs me to ask. Did you use the Windows 7 Patcher to create a correct/proper installation media? The latest version, along with the requisites, can be found at the below link: http://www.asrock.com/microsite/Win7Install/" rel="nofollow - http://www.asrock.com/microsite/Win7Install/ |
sunnysky2003 wrote:Posted By: sunnysky2003
Date Posted: 04 Jan 2016 at 8:37am
|
Hi, Wardog. I patched my Win7 iso with the tool provided. Without it, I couldn't even properly install Win7. thanks.
|
Posted By: sunnysky2003
Date Posted: 04 Jan 2016 at 3:06pm
|
Hi, All, I cleared my CMOS as instructed by Xalter. Problem SOLVED!! Thank you all for helps!!!
|
Posted By: Xaltar
Date Posted: 04 Jan 2016 at 3:07pm
Great to hear  Enjoy your Beebox
 |