X57- Creator - No SATA drives working - A6 and A9?
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=17032
Printed Date: 26 Dec 2024 at 10:46pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X57- Creator - No SATA drives working - A6 and A9?
Posted By: AlejandroMaximus
Subject: X57- Creator - No SATA drives working - A6 and A9?
Date Posted: 21 Oct 2020 at 7:00pm
|
Hello Ive been using my X570 creator motherboard for a while with no issues. I recently (a few days ago) purchased 2 10TB Ironwolf SATA drives to use with it and have noticed SATA appears totally not functional. My system is configured as such: X570 Creator running Bios 3.0.0 flashed using the Quick Flash Button on the back of the motherboard Ryzen 3950x 64 GB DDR 3600 Ram (2 x 32 GB chips) 1 Titan X (G200) GPU 1 3090 FE GPU 1 1TB Sabrent m2 SSD 2x 10 TB Ironwolf Drives (not working) Fractal Design Define 7 XL Case with Built in Fan Controller Kraken X62 CPU Cooler When my system boots I occasionally see A6 or A9 'Dr Diagnostic' errors which require a reboot or reset to pass. Once the system fully boots the Dr Diagnostic warning goes away, and the system appears fully functional. Booting into the Bios and using the storage manager shows no connected SATA drives. Things I have tried: * Different PSU's * New SATA power cables * New SATA data cables ??Different SATA ports on the motherboard * Verified both HDD's working via external USB 3.0 drive enclosure * Different SATA HDD's did not work * Sata SSD's do not work * Flashing / Resetting BIOS (no change) * Forcing sata power ON in BIOS (from Auto for all SATA channels) Things I have noticed: No OS see's the SATA drives (nor the BIOS) - and they appear to not spin at all - even if plugged into SATA power from the PSU when the PSU is on. Plugin in Data cable doesn't cause a spin up either. The drives spin up when placed into a USB enclosure and seem to be recognized over USB just fine? Ive noticed that my Kraken CPU pump no longer lights up, and the built in Fan Controller also now appears unhappy and not functional - the motherboard Fan Slots appear to function however, and I can power my fans via the various 3/4 pin fan plugs around the board. I can't imagine the Fan Controller and the SATA controller having anything to do with one another, other than they both receive power from SATA / PSU. Is there a diagnostic I can run to check if SATA is functioning properly on the motherboard? Thank you. |
Replies:
Posted By: AlejandroMaximus
Date Posted: 22 Oct 2020 at 1:52am
issue got solved!! |
AlejandroMaximus wrote: