Z170 Extreme4 - Booting live-usb refi issues
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1708
Printed Date: 25 Dec 2024 at 12:21pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Z170 Extreme4 - Booting live-usb refi issues
Posted By: aleben
Subject: Z170 Extreme4 - Booting live-usb refi issues
Date Posted: 11 Jan 2016 at 6:49am
|
Hi guys, I have been one day struggling to install ubuntu along with my windows10 on my MOBO. I tried everything and it has been impossible to startup the usb live stick in UEFI mode ( both from usb 2.0 and 3.0 ) I created the usb with RUFUS , specifically to run in UEFI. When it starts , first show the ubuntu menu, then I am able to select to install. It starts loading and then after a while : (initramfs) Unable to find a medium containing a live file system .... If i run the boot usb in legacy mode it works, but after ubuntu installation I can not boot ubuntu in any way :( please give me any advice, I start to think the problem is in the MOBO, but I am still puzzling ....
|
Replies:
Posted By: parsec
Date Posted: 11 Jan 2016 at 11:17am
|
Well, in Windows land we do either one of two things to get a USB installation media recognized for UEFI installations. The first thing is to go into the CSM option, and set the Launch Storage OpROM Policy to UEFI Only. This does not require the video source to be GOP compatible, a UEFI protocol. The second thing is to set the CSM option to Disabled. That enables full UEFI booting and requires the video source to be GOP compatible. The Intel integrated graphics and VBIOS are GOP compatible. Most newer video cards have a GOP compatible VBIOS, but it is always advisable to check that with video card manufacture. All I know with certainty is all EVGA sourced video cards since the Nvidia 700 series are GOP compatible. That is also why I use them exclusively. In the Boot order list, if the UEFI is configured correctly, your USB flash drive should appear with the prefix "UEFI". The USB flash drive will appear as, "UEFI: <flash drive name>". I don't know if you've installed Windows 10 in UEFI mode. Few if any ASRock boards officially support Ubuntu or Linux. Do you know if Ubuntu will work with the Intel EFI Option ROMs that are part of the board's UEFI? ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
Posted By: wardog
Date Posted: 11 Jan 2016 at 11:53am
Disable Secure Boot in the BIOS and what happens?  |
Posted By: aleben
Date Posted: 11 Jan 2016 at 8:43pm
|
I have secure boot disabled in the UEFI MOBO config. I had disabled CSM and enabled. In both the situations I can select to start the USB from UEFI ( with CSM disabled, I can only startup it in UEFI mode) . I see the initial screen, I select the functionalities, then when it starts loading the image it fails with the error. I could try to change the pen drive ( it is 64gb) , not sure if could be the pen drive. I have installed windows 10 in uefi mode ( i can see the efi partition ) . I know ubuntu is uefi compatible : https://help.ubuntu.com/community/UEFI I hope it is a pen drive issue, really worried about a mob issue :( |
Posted By: aleben
Date Posted: 13 Jan 2016 at 7:12pm
|
[SOLVED] I finally succeeded !!! There was a really hidden configuration MOBO side, under advanced, USB ports configurations. In there you can configure both MOBO Usb ports and third party ports ( the case ones for example) . The MOBO ones were by default set in legacy mode ( so they were not able to start UEFI live USB systems) . I changed that to be UEFI and I was able to boot ubuntu from the USB stick from the MOBO usb 2.0 ports. Thanks everyone. Cheers
|