Motherboard Graphics ports no signal
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=17210
Printed Date: 11 Nov 2025 at 11:24pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Motherboard Graphics ports no signal
Posted By: Jaythri
Subject: Motherboard Graphics ports no signal
Date Posted: 11 Nov 2020 at 6:30am
|
For reference, the board I'm currently using is a ASROCK X570 Phantom Gaming 4 and a Ryzen 7 CPU. I recently had to remove my graphics card for RMA purposes and while the card is out I'm trying to set up my monitors to run on the motherboard graphics ports. I turned off the computer, removed the card, plugged my monitors into the motherboard ports, rebooted the computer, and no signal is sent to my monitors. The computer seems to boot up just fine, but it's not getting any video feed. Things I've done to troubleshoot so far: I've attempted to reset the BIOS by discharging the CMOS, which seemed to have no effect. It's hard to tell if just removing the battery and completely disconnecting power for 30 minutes or so had any effect since I was unable to find the jumper for resetting CMOS. |
Replies:
Posted By: datonyb
Date Posted: 12 Nov 2020 at 4:42am
|
your board cannot display video output using a normal ryzen cpu the board can only display video with a 2200g/3200g etc etc if the cpu dosnt have the letter G on the end its not got video outputs ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |