Polycrome Failure to Detect Components
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=17296
Printed Date: 01 Aug 2025 at 3:41am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Polycrome Failure to Detect Components
Posted By: Fatal
Subject: Polycrome Failure to Detect Components
Date Posted: 21 Nov 2020 at 1:26pm
Today I attempted to install the ASRock Polychrome RGB ver:1.0.60 for my ASRock X570 PHANTOM GAMING 4 motherboard. When I opened the the program I was only able to control one (of the two) RGB components onboard my pc.
I decided to try and update the software to its latest version (ASRock Polychrome RGB ver:1.0.78). This resulted in the program losing the ability to control BOTH components. I decided to uninstall the program in an attempt to regain the default rainbow RBG setting the components were on before the initial download.
Everything was able to be deleted except for the ASRock Utility folder in Program Files (x86) because it is running in another program somewhere that I cannot locate. My RAM reset back to the rainbow mode, but my GPU lights are completely off.
Can someone tell me how to remove all the files from the Polycrome Sync program, and how to turn my GPU back on?
-------------
lc
|
Replies:
Posted By: Grumpy_old_man
Date Posted: 21 Nov 2020 at 3:27pm
Hello Fatal,
which CPU are you using on your motherboard, what RAM, and which BIOS version?
|
Posted By: Fatal
Date Posted: 22 Nov 2020 at 2:58am
Hello,
My CPU is AMD RYZEN 5 3600 6-Core 3.6 GHz
My RAM is G.SKILL TridentZ RGB Series 16GB (2 x 8GB)
And my BIOS says that the UEFI is X570 Phantom Gaming 4 P2.60
I believe it might also be important to list my graphics card - ASRock Phantom Gaming D3 Radeon RX 5600 XT
-------------
lc
|
|