X399M Raid 0 Fresh Install
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=17310
Printed Date: 14 Aug 2025 at 6:09am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X399M Raid 0 Fresh Install
Posted By: jepsii
Subject: X399M Raid 0 Fresh Install
Date Posted: 23 Nov 2020 at 1:29pm
Hello everyone.
I was trying to do a fresh windows 10 install on my PC, due to issues with Windows Updates being unable to update and causing issues. I've had this PC for 3 years running Raid 0.
Well, I currently have a X399M Taichi and have used it in Raid 0 with 3 m.2 nvme's, without issues. I loaded the correct drivers from ASRock and it shows the correct array. However, I am getting an issue with it not allowing me to load windows onto it.
It states "Windows can't be installed on drive 0 partition 1. Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu.
I am loading windows off of a USB stick and never had problems in the past. Any ideas on what I can do to correct this?
Thank you
|
Replies:
Posted By: jepsii
Date Posted: 23 Nov 2020 at 5:31pm
Figured it out for anyone else wondering. Needed to format the raid 0 array to GPT.
The way you do this, continue to booting up as if you are going to install windows 10. Click repair instead of install.
Run the Command prompt.
Type "diskpart" in the command prompt. Then type "list disk" and it will show you the drive arrays. Find the raid 0 array that you wish to format, mine was 0.
Then type "select disk 0" change the 0 to your array that you want.
Type "clean"
Type "convert gpt"
Type "exit"
Now reboot and install the 3 raid drivers again. It should now let you continue to install Windows 10.
|
|