Intel Motherboards - Z490 Extreme4

Print Page | Close Window

Z490 Extreme4 - RAM XMP

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=17331
Printed Date: 01 Aug 2025 at 4:19am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Z490 Extreme4 - RAM XMP

Posted By: HeyDude88
Subject: Z490 Extreme4 - RAM XMP
Date Posted: 26 Nov 2020 at 12:55am

I am not able to get my Trident Z RGB RAM - F4-3200C16D-16GTZR to boot into windows if I enable XMP Profile. I switched from sockets 1/3 to 2/4 and still same issue. I enabled and increased the voltage. According to G. Skill this RAM should work fine with the Z490 motherboard and shows 2/4 on Asrock RAM compatibility.

Eveything else is default. Running P1.20 Bios Intel 10600k processor

The XMP Profile seems to be correct on motherboard (matches G. Skill site) but once enabled DDR4-3200MHz CL16-18-18-38 1.35V.

Using the Asrock Configurator shows current settings of:
15-15-15-36: 2 Freq 2127MHz