Print Page | Close Window

Polychrome: Chroma Connect freezes lighting

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=17510
Printed Date: 12 Aug 2025 at 9:47pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Polychrome: Chroma Connect freezes lighting
Posted By: MrPhung
Subject: Polychrome: Chroma Connect freezes lighting
Date Posted: 15 Dec 2020 at 4:12am
Hi there,

I have Synapse 3 installed and use it with my DeathAdder V2 which seems to work fine on it's own. However I have some trouble when I use chroma connect.

My Mainboard is an ASRock B450 Steel Legend. I have ASRock Polychrome Version v2.0.83 installed (Firmware v3.4) and Razer Synapse Version 3.5.1130.111812.

When I start polychrome and razer synapse my mainboard is detected and I can enable chroma connect. My mainboard is listed in chroma studio as well and I can sync the lighting effects as I want.

However this only works for roughly ~30mins. After that time all the lighting connected directly to my mainboard just freezes (rgb fans connected to the 3 pin header on the mainboard and the lighting on the mainboard itself). The lighting on my mouse however keeps working as intended. The mainboard is still listed in chroma studio and razer itself however the actual lighting does not change anymore.

I even had the problem that I wasn't able to control the lighting with polychrome after closing synapse. This forced me to flash the rgb controller chip on my mainboard. After that I was able to change the lighting again. I tried to sync my ligh effects again and had the same result: after some time it's out of sync and my fans and the lights on the mainboard are stuck on one random color.

Is this a problem with synapse or polychrome? Is there anything I can do?


Best regards.



Replies:
Posted By: hanzox7
Date Posted: 21 Dec 2020 at 1:45pm
I just installed a Silverstone PF240 AIO on my X570 Phantom Gaming-ITX/TB3. I have a Razer Cynosa, a Razer Mamba Elite and a Silverstone FG122 fan grill. The AIO pump is the first RGB device, connected directly to the ARGB pins on the motherboard. The pump fans are daisy-chained next and then the fan grill.

I'm getting error messages when I open Polychrome Sync. First error message is:



If I try to enable Chroma Connect, I get this error:



The app "crashes" but can still change colors and effects, however I can't open the menu under the gear icon.

I'm on the last BIOS version (2.80) and last version of Polychrome Sync (2.0.83). Synapse is version 3.5.1215.121019.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net