Asrock B450 Pro4 M.2 Standoff Screw Size
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=17741
Printed Date: 06 Feb 2025 at 2:03am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Asrock B450 Pro4 M.2 Standoff Screw Size
Posted By: neeplez
Subject: Asrock B450 Pro4 M.2 Standoff Screw Size
Date Posted: 08 Jan 2021 at 3:16am
| I recently received a prebuilt computer that I planned to upgrade the storage of with a 1TB nVME SSD. Unfortunately when I received it, the screw to hold the SSD to the board for both M.2 slots was missing (standoff installed. Only missing screw). I've scoured the internet and thoroughly read the manual for this Mobo, and I've yet to find what type of screw is used for this M.2 standoff. Would anybody happen to know? |
Replies:
Posted By: muziqaz
Date Posted: 08 Jan 2021 at 6:22pm
This is taken from one of the toms hardware forum threads:
Googling for CM2x3-3.3 gives you few options for the screws :) Hope this helps ------------- folding@home |
The correct screw size is 2.0 x 3mm (CM2x3-3.3). If you are in the USA, then you can usually find the screws at Ace Hardware stores. Make sure you check the length