X99 Extreme6/3.1
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1775
Printed Date: 25 Dec 2024 at 2:49pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X99 Extreme6/3.1
Posted By: SeRaS
Subject: X99 Extreme6/3.1
Date Posted: 20 Jan 2016 at 4:49pm
|
Hello. I have X99 Extreme6/3.1 motherboard and samsung 950 PRO NVMe SSD disk. Last BIOS version on official site when ASRock release new BIOS for this board and ad NVMe support? thanks. |
Replies:
Posted By: wardog
Date Posted: 20 Jan 2016 at 5:06pm
|
Have you considered the BETA L1.19, dated Dec 16 2015, offered in the BETA Downloads section of your board? I can't say either way if NVMe support is there yet it'd be incredulous if it isn't. The NON /3.1 BIOS is as far as I know are neck and neck to the /3.1 ed. boards. The only difference I'm aware is the additional 3.1 card. They added NVMe support to the NON boards beginning with their 1.80 release. EDIT: and their NON 3.1 NVME support was added back in Jan 2015, BIOS 1.70 or 1.80, depending. If not, contact ASRock Tech Support at their Global site, as you didn't set your location, at http://event.asrock.com/tsd.asp" rel="nofollow - http://event.asrock.com/tsd.asp Keep us posted please. |
Posted By: wardog
Date Posted: 20 Jan 2016 at 5:16pm
|
I'm scratching my head after posting that. Are you POSITIVE NVMe support is not there? Why is is it you say that? |
Posted By: SeRaS
Date Posted: 20 Jan 2016 at 5:43pm
|
I tried BETA L1.19. no results. When installing windows 10 SSD drive not in the disk list in board http://www.asrock.com/mb/Intel/X99%20Extreme63.1/?cat=Specifications" rel="nofollow - Specifications 1 x Ultra M.2 Socket, supports M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3 x4 (32 Gb/s)** **Support to be announced.
|
Posted By: wardog
Date Posted: 20 Jan 2016 at 5:59pm
|
In the BIOS, is the drive shown in System Browser? |
Posted By: SeRaS
Date Posted: 20 Jan 2016 at 6:09pm
|
50/50 once the windows installer vidil drive but was stuck at 1% and show error I do not remember error code.
|
Posted By: wardog
Date Posted: 20 Jan 2016 at 6:09pm
|
BIOS > Boot tab > CSM > Launch Storage OpROM Policy , set to UEFI Only Save and Reboot, and the drive should now appear in the drive options list. |
Posted By: SeRaS
Date Posted: 20 Jan 2016 at 6:19pm
it is not help me
|
wardog wrote:Posted By: wardog
Date Posted: 20 Jan 2016 at 6:23pm
|
Contact ASRock using the provided above link. |