New x399 Phantom Gaming 6, no video or POST
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=18206
Printed Date: 04 May 2024 at 9:42pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: New x399 Phantom Gaming 6, no video or POST
Posted By: Jesuszilla
Subject: New x399 Phantom Gaming 6, no video or POST
Date Posted: 23 Feb 2021 at 4:29am
| I recently purchased an x399 Phantom Gaming 6 motherboard to replace my Gigabyte Aorus x399 that had some components killed during a power surge and I can?™t seem to get the thing to POST (I connected a speaker to the board, no beep), and no video on my plugged in EVGA NVidia GeForce 1080. The processor is a Threadripper 1950x, and was operational on the older motherboard earlier this morning. I?™m wondering if it just didn?™t seat right or something? |
Replies:
Posted By: Jesuszilla
Date Posted: 24 Feb 2021 at 6:29am
| Turns out I didn?™t have the 12V plugged in. Now I did and I got it to get to a ?œInsert boot media??screen, but now I can?™t get that anymore. It just runs and then turns off, no beeps. What?™s wrong? |
Posted By: Xaltar
Date Posted: 24 Feb 2021 at 3:54pm
|
Clear CMOS, ideally by disconnecting power from the wall and pulling the CMOS battery for about 20 mins or so. I am guessing you changed some settings in the UEFI? If not, pull the RAM out and reseat it making sure it is fully inserted into the slot. I have the same board and experienced the same issue, turned out to be the RAM not being all the way seated. The slots are a very tight fit, which is good but can mean that the RAM feels secure before it's actually seated properly. ------------- 
|