Computer not waking up from sleep mode
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1821
Printed Date: 22 Dec 2024 at 2:39pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Computer not waking up from sleep mode
Posted By: wlammer
Subject: Computer not waking up from sleep mode
Date Posted: 25 Jan 2016 at 10:59pm
|
Hello, My computer is not waking up from sleep mode, In sleep mode the power Led is blinking and fans running, using keyboard, mouse or power button wont wake up the computer. Only solution is to press the powerbutton for 5 seconds to shut the computer down. I checked in device manager if power on from sleep is enabled from the mouse and keyboard, both ok. I have a 970Fatal1TY motherboard, with a FX8150 CPU, 8G DDR3 Ram, MSI R9280X card, Crucial SSD 500Mb and running on windows 10/64. Also had the problem when shutting down the system fans and led kept on running, i solved that by switching off "quick startup" in power management. Makes startup way longer. Anybody any suggestions for the above? Thanks in advance, regards wim |
Replies:
Posted By: parsec
Date Posted: 26 Jan 2016 at 3:09am
|
Normally in Sleep mode, fans in the PC should not be running. That suggests that for some reason you are not entering the S3 Sleep state. Do you have the Fatal1ty 970 Performance board, or the Fatal1ty 970 Performance/3.1? There are only two drivers available for download for Windows 10. Are you using the standard Windows 10 drivers, or did you install the AMD all in 1 driver ver:15.20.1060? This could be a driver problem with Win 10 and your AMD board. Did you change any of the Sleep settings in the BIOS? Some mice and keyboards, wireless types usually, can have problems sending a wake from Sleep signal. I have that problem myself, even with MSoft mice and keyboards. That could be driver related too. ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
Posted By: wardog
Date Posted: 26 Jan 2016 at 4:32am
|
^^^ what parsec said, and, whatever board .../3.1 or not .... try updating to the latest available BIOS for YOUR board. |