Print Page | Close Window

Z490 Taichi and SSD?™s

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=18297
Printed Date: 29 Jul 2025 at 1:48pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Z490 Taichi and SSD?™s
Posted By: MD82
Subject: Z490 Taichi and SSD?™s
Date Posted: 05 Mar 2021 at 12:28am
Hello,

I have 3 dead plain SSD?™s. I switched from an ASUS Sabertooth Z170 S to this board. All went well however one of my three SSD?™s is not being sensed. It?™s a 480 Gb Kingston A400. Initially I tried keeping the same SATA numbers as before. I had them on 1, 2 and 4. However only 1 and 4 were detected. The Kingston on 2 was not. I tried two other spots on the 0 - 5 slots, but to no avail, I see in the manual that some combinations of slots disable others, but if I understood correctly, slots 1, 2 and 4 weren?™t conflicting. Clearly this is new to me and I?™m doing something wrong.

So the question is, what slots are best used (0-5 and A1 and A2) for 3 plain jane SSD?™s in order for the BIOS to detect all three?

Thanks,

p.s. AHCI now selected in BIOS.



Replies:
Posted By: MD82
Date Posted: 05 Mar 2021 at 12:45am
Nevermind. Swapped cables and all good ;-)



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net