Intel Motherboards - h110 btc+ does not work in dual channel

Print Page | Close Window

h110 btc+ does not work in dual channel

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=18444
Printed Date: 27 Jul 2025 at 6:03pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: h110 btc+ does not work in dual channel

Posted By: lynckmeister
Subject: h110 btc+ does not work in dual channel
Date Posted: 24 Mar 2021 at 11:24pm

Hi,
My h110 btc+ does not work in dual channel mode... I tried several DDR4 DIMMS but only one (in bank b) works. If I plug another one (same manufacturer) in bank a the board does not show anything (monitor is switching off). I tried it with 8 GB modues and 16 GB modules.
Same happens if I change a working RAM module vom b to a bank ... the system is not working only equipped with a module in bank a...

Is my board broken , or is there anything I can try£ I just loaded the newest bios version (1.60).

cheers