ASROCK h110 pro BTC+ DEAD£
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=18590
Printed Date: 27 Jul 2025 at 5:23pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ASROCK h110 pro BTC+ DEAD£
Posted By: crazy123
Subject: ASROCK h110 pro BTC+ DEAD£
Date Posted: 09 Apr 2021 at 4:27pm
hi guys my rig was running on 11gpu without any molex powered by 2 1000w corsair now the issue was when i try to run the 12gpu sometimges 1 specific gpu was not working spinning not recognised etc then sometimes it was working but windows freeze after a while
SO i though plugging molex cables might help (all self powered raisers)
then i turn pc off, plugged molex it did not start. took off but while i was trying molex i was also trying to connect the new gpu with one of them cheap pcie cable which i had to use splitter so i might have plugged the wrong end to PSU so it did not start when i tried i don't know if this damaged any issue then i took the cable it started..
Then tried with molex same molex cable powered both sockets no start etc after that i kind of forget which step caused not starting the gpu.
Now i have a gpu no power, no power on ethernet lights so i can't see any life i hae tried CMOS over night. Took rams off re-install socket one, took cpu off, reinsalled. Used both PSUs not starting at all. When i fan test PSU it does not spin when it is plugged to mb but spins when it s not plugged in.
I know i probably damaged the mother board but just asking here as the techs might have a answer just a little hope. thanks in advance.
|
Replies:
Posted By: crazy123
Date Posted: 09 Apr 2021 at 4:32pm
sorry guys mentioning gpu should be motherboard did not sleep well here is fixed wording it didnt let me edit.
Then tried with molex same molex cable powered both sockets no start etc after that i kind of forget which step caused not starting the MB.
Now i have a MB no power, no power on ethernet lights so i can't see any life i have tried CMOS over night. Took rams off re-install socket one, took cpu off, reinsalled. Used both PSUs not starting at all. When i fan test PSU it does not spin when it is plugged to mb but spins when it s not plugged in.
I know i probably damaged the mother board but just asking with a little hope if there is anything else i can try as the techs might have a answer. thanks in advance.
|
|