H110 pro btc+ Onboard Graphics Problem
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards (German)
Forum Description: Technischer Support in Deutsch
URL: https://forum.asrock.com/forum_posts.asp?TID=18601
Printed Date: 21 Nov 2024 at 9:46pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: H110 pro btc+ Onboard Graphics Problem
Posted By: DerM91
Subject: H110 pro btc+ Onboard Graphics Problem
Date Posted: 11 Apr 2021 at 12:58am
Hello,
I have a problem with my setup:
- Mainboard asrock h110 pro btc+
- CPU Intel Cleron G4920 Socket 1151 LGA
- RAM DDR4 3200Mhz set to 2400
- 13 x graphics cards
I wanted to use the internal graphics card.
For this I have activated it and also selected it as primary, because I would like to have a small monitor on it for safety.
When I do that and get into Windows and the drivers are installed, it throws the video cards out at me.
Then I get the driver code 3 error.
I have so far
- Reinstalled the drivers with DDU
- All drivers out and new again
- External graphics card used to test but there is nothing more.
After much back and forth it now runs again when I disable it in the bios.
Can it be that the CPU can not do both?
Did I do something wrong?
I apologize now for my bad English.
Thanks a lot
Translated with http://www.DeepL.com/Translator" rel="nofollow - www.DeepL.com/Translator (free version)
|
Replies:
Posted By: EcoPro24
Date Posted: 27 Apr 2021 at 12:14am
|
Hi, how you managed to run 13 GPUs? Did you update the firmware and attached a screen as for me it's now allowing to add more than 8 GPUs? Thanks
|
|