H110 pro btc+ Onboard Graphics Problem
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=18607
Printed Date: 27 Jul 2025 at 12:03pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: H110 pro btc+ Onboard Graphics Problem
Posted By: DerM91
Subject: H110 pro btc+ Onboard Graphics Problem
Date Posted: 11 Apr 2021 at 8:52pm
Hello,
I have a problem with my setup:
- Mainboard asrock h110 pro btc+
- CPU Intel Cleron G4920 Socket 1151 LGA
- RAM DDR4 3200Mhz set to 2400
- 13 x graphics cards
I wanted to use the internal graphics card.
For this I have activated it and also selected it as primary, because I would like to have a small monitor on it for safety.
When I do that and get into Windows and the drivers are installed, it throws the video cards out at me.
Then I get the driver code 3 error.
I have so far
- Reinstalled the drivers with DDU
- All drivers out and new again
- External graphics card used to test but there is nothing more.
After much back and forth it now runs again when I disable it in the bios.
Can it be that the CPU can not do both?
Did I do something wrong?
I apologize now for my bad English.
Thanks a lot
|
Replies:
Posted By: LST1977
Date Posted: 13 Apr 2021 at 3:30pm
I have the same issue, when switching to onboard graphics in BIOS.
I have a:
- ASROCK H110 pro BTC+
- Intel i5 - 6600 and 10 GPUs
- Server PSU
The display shows up when I connect to GPU, but not on Onboard GPU.
There was also a discussion in 2018 in this forum, however there was no solution at the end...
Best
Lorenz
|
|