Print Page | Close Window

z590 PG Velocita BIOS problems.

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: http://forum.asrock.com/forum_posts.asp?TID=18651
Printed Date: 26 Sep 2021 at 7:34am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: z590 PG Velocita BIOS problems.
Posted By: enko
Subject: z590 PG Velocita BIOS problems.
Date Posted: 19 Apr 2021 at 3:30am
Dear AsRock, you are my brand of choice. I've never had any serious problems with your products. They are excellent.

I've recently upgraded my system to following spec:
z590 PG Velocita
11900k
4000mhz RAM
Asus TUF 3090
Samsung 960 Pro
Samsung 970 Evo

The initial build and install was rock solid running with CAM/ReBar. But I was waiting for BIOS update that enabled ABT.

I initially upgraded to BIOS 1.10 - which immediately brought some instability. With my setup I can trigger almost a guaranteed crash with 1.10 running maxed out Dota2 replays - about 10-20 min in. It happens every time.

A lot of other games seem stable with 1.10 but will also occasionally crash with what appears to be memory corruption (I could be wrong).

When you released 1.30 - I updated immediately - and began to have colossal problem with stability in real-time 3d.

Everything was crashing 5-10 min in. I've tested with:
PUBG
Dota2
Control
Doom Eternal

All these games processes would crash, sometimes taking windows down with it with BSOD. I genuinely thought I fried something in the system - not enough to brick it but enough to make it unstable.

As I retraced my steps and returned the system to BIOS 1.10 - stability returned, but it would still crash on occasion. So I've gone back to BIOS 1.0 - which made the system as stable as when I first built it. It is rock solid.

So please look into issues with your BIOS 1.10 and 1.30, latter one is really bad for me.

Thank you.




Replies:
Posted By: enko
Date Posted: 31 May 2021 at 7:21am
Update:

The latest update 1.40 has resolved all my problems. Absolutely stable with CAM & ABT enabled.

It looks like memory profiles were updated resulting in different settings being detected for my RAM - specifically command rate went from N1 to N2.


Posted By: Xaltar
Date Posted: 01 Jun 2021 at 2:03pm
Thanks for the update, enjoy your system

-------------



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net