AMD Motherboards - FM2A58M-HD+ 5 beeps

Print Page | Close Window

FM2A58M-HD+ 5 beeps

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1888
Printed Date: 05 Jan 2025 at 7:00am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: FM2A58M-HD+ 5 beeps

Posted By: mibuilder
Subject: FM2A58M-HD+ 5 beeps
Date Posted: 01 Feb 2016 at 7:55am

Good day,

I'm trying to build a simple PC. I have installed the mb, CPU and RAM. Connected a 20pin power from PSU to MB, then 4pin processor power into a mb head just above CPU, then CPU fan power into the mb. And power led, hdd led, power button, reset button, speaker from chassis to mb. Did my best to follow all the manuals. When i start the PC - both processor fan and PSU fan are spinning and power led is on. But it does not boot, gives 5 short beeps.

1) MB: ASROCK FM2A58M-HD+

2) CPU: AMD A6 5400K. It does have an integrated graphics Radeon HD 7540D according to AMD website:

http://shop.amd.com/en-us/components/processors/AD540KOKHJBOX

3) RAM: Crucial Ballistix 1 stick x 4GB DDR3 1866 @1.5v UDIMM 240pin XT

4) PSU: Tecnoware Free Silent 520

I've found this FAQ - http://www.asrock.com/mb/AMD/FM2A58M-HD+/?cat=FAQ

>>>

5 long beeps mean that the system couldn't recognize the graphics. Some AMD CPUs (i.e AMD Athlon/Sempron family CPU) don't have integrated graphics processors.

<<<

My CPU does have it and i tried to install a discrete graphic card - it was no change, same 5 short beeps.

So, what could be wrong? can it be CPU or MB hardware failure?

Thanks in advance!

Replies:

Posted By: mibuilder
Date Posted: 01 Feb 2016 at 6:46pm

I would like actually to make a more specific question - in this situation should i keep trying to fix it by myself or is it more reasonable to seek a warranty service? Please advicce.

Posted By: CrazyWolfNsk
Date Posted: 02 Mar 2016 at 5:02pm

Have the same problem (

Have u solved this problem?

And how did u solve it, if u did?