Resizable BAR support for X299
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=18892
Printed Date: 26 Dec 2024 at 6:45pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Resizable BAR support for X299
Posted By: Gamer313
Subject: Resizable BAR support for X299
Date Posted: 20 May 2021 at 12:14pm
|
Hi. I would like to request an updated BIOS for adding Resizable BAR support (or C.A.M.) to the X299 motherboard lineup. Currently, ASUS, EVGA, MSI, and Gigabyte have recently begun adding support to their X299 boards, and it would be a welcome addition to see Asrock do the same for their X299 motherboards, and would go a long way in keeping the HEDT platform current. For reference, my motherboard is: Fatal1ty X299 Gaming K6 Thanks. |
Replies:
Posted By: Gamer313
Date Posted: 30 May 2021 at 2:45pm
|
Any official response to this? I would like to know Asrock's stance on this issue. I've also opened a support ticket that's also gone unanswered. |
Posted By: ASRock_TSD
Date Posted: 03 Jun 2021 at 7:31pm
|
Hi Gamer313, Thank you for your post. Please update the BIOS P2.00B for the CAM function. The BIOS file's download link is as below. https://drive.google.com/file/d/1Rsno6pZty3XS9Y8J-FmpQ1SFUeIbbAUd/view%3cusp=sharing" rel="nofollow - https://drive.google.com/file/d/1Rsno6pZty3XS9Y8J-FmpQ1SFUeIbbAUd/view?usp=sharing After updating BIOS, please follow the instructions below to enable "CAM". 1.boot into BIOS and go to the "boot" page, then go to "CSM" 2.Disabled "CSM" 3.Go to Advanced\chipset configuration, then enable "Above 4G" and "CAM" Please make sure you are using the AMD RX6000 series or the NVIDIA 30 series with the vBIOS which supports Resizable BAR. I linked the instant flash SOP as below. https://www.asrock.com/support/BIOSIG.asp%3ccat=BIOS8" rel="nofollow - https://www.asrock.com/support/BIOSIG.asp?cat=BIOS8 If you have other questions, please feel free to contact us. All the best, ASRock TSD |
Posted By: Gamer313
Date Posted: 06 Jun 2021 at 2:20am
|
Neither of the above links work. Could you please re-upload again? Thanks. |
Posted By: Gamer313
Date Posted: 06 Jun 2021 at 2:24am
|
Never mind. The bit after the last '/' needed to be removed. Link works fine. |
Posted By: badaz
Date Posted: 13 Jun 2021 at 9:06am
|
Hello, do you have a link for a BIOS with Resizablebar support for the X299 Killer SLI/ac ? The most recent bios version available on the support site is 2.00 and dates back to 2019/11/29. If it does not exist yet, do you plan on release one with Resizablebar support anytime soon ? |
Posted By: Gamer313
Date Posted: 15 Jun 2021 at 7:31am
|
The C.A.M. option doesn't show up if 'Fast Boot' is enabled. My understanding was that 'Fast Boot' didn't use CSM, and since 'Fast Boot' hides the CSM option, it cannot be disabled. Otherwise, C.A.M. works as expected. |
Posted By: Raggz
Date Posted: 16 Jun 2021 at 12:21am
| I would like bios for x299 Taichi to |
Posted By: badaz
Date Posted: 16 Jun 2021 at 2:14am
I do not have the same motherboard as you. However, I'd like to know Asrock's stance on the subject, juste like you, since I own an X299 board as well, the X299 Killer sli/ac. Please Asrock? Could you tell us what your plans are for the other X299 cards for which there is no Resizablebar enabled BIOS available yet? |
Gamer313 wrote:Posted By: Raggz
Date Posted: 17 Jun 2021 at 10:27pm
| Support sendt me a new bios for my x299 taichi. Now i have Resizeable BAR working. :) |
Posted By: ASRock_TSD
Date Posted: 18 Jun 2021 at 6:02pm
|
Hi badaz, Thank you for your post. Please update the BIOS P2.00B for the CAM function. The BIOS file's download link is as below. https://drive.google.com/file/d/1BRzgtZZL0IsmCqumz9SQYMAe19MT4OgV/view%3cusp=sharing" rel="nofollow - https://drive.google.com/file/d/1BRzgtZZL0IsmCqumz9SQYMAe19MT4OgV/view?usp=sharing After updating BIOS, please follow the instructions below to enable "CAM". 1.boot into BIOS and go to the "boot" page, then go to "CSM" 2.Disabled "CSM" 3.Go to Advanced\chipset configuration, then enable "Above 4G" and "CAM" Please make sure you are using the AMD RX6000 series or the NVIDIA 30 series with the vBIOS which supports Resizable BAR. I linked the instant flash SOP as below. https://www.asrock.com/support/BIOSIG.asp%3ccat=BIOS8" rel="nofollow - https://www.asrock.com/support/BIOSIG.asp?cat=BIOS8 If you have other questions, please feel free to contact us. All the best, ASRock TSD |
Posted By: badaz
Date Posted: 18 Jun 2021 at 6:52pm
|
Hello, thank you for your quick answer. I flashed the 2.00B Bios you sent me, then followed your insturctions, however, whenever I enable C.A.M support in Bios (having disabled CSM as well), I get 5 long beeps on next reboot and I have to clear the Bios before the system can boot normally again. My GPU is an MSI RTX 3080 Ventus 10GB OC, and I have flashed the latest Bios for it (with resizable support). GPU-Z reports that GPU hardware support for Resizable BAR is enabled. Actually in the GPU-Z "PCIe Resizable BAR" section, every flag is "yes" (except for "Resizable BAR enabled in BIOS" which I cannot enable without getting the 5 long beeps problem). Are you aware of this problem ? My CPU is an i7 7740X. Thanks |
Posted By: badaz
Date Posted: 18 Jun 2021 at 6:53pm
| Above 4G is enabled is BIOS too |
Posted By: Uggis007
Date Posted: 19 Jun 2021 at 6:05am
| Is it possible to get the bios update for the x299 OC Formula ? |
Posted By: ASRock_TSD
Date Posted: 21 Jun 2021 at 5:24pm
|
Hi Uggis007, Thank you for your post. Please update the BIOS P2.00B for the CAM function. The BIOS file's download link is as below. https//drive.google.com/file/d/1ZikA7dayT1iC8YsJHTDwyi5pcmafOjjx/view?usp=sharing After updating BIOS, please follow the instructions below to enable "CAM". 1.boot into BIOS and Go to Advanced\chipset configuration 2.enable "Above 4G" and "CAM" 3.Disabled "CSM". Please make sure you are using the AMD RX6000 series or the NVIDIA 30 series with the vBIOS which supports Resizable BAR. I linked the instant flash SOP as below. https://www.asrock.com/support/BIOSIG.asp%3ccat=BIOS8" rel="nofollow - https://www.asrock.com/support/BIOSIG.asp?cat=BIOS8 If you have other questions, please feel free to contact us. All the best, ASRock TSD |
Posted By: cormsok
Date Posted: 21 Jun 2021 at 7:18pm
|
Will this bios update apply to the x299 steel legend board as well? Thanks ------------- Regards Cormac |
Posted By: badaz
Date Posted: 24 Jun 2021 at 2:50am
Hello, I tried again today, having previously flashed the 2.00B BIOS you sent me, but I cannot find a set of parameters that does not result in the 5 beeps when C.A.M. is enabled in BIOS. Here is my config : - Intel 7740X (Kaby Lake X) - Asrock X299 Killer SLI/ac (BIOS v2.00B, the one you linked) - MSI RTX 3080 Ventus 10GB OC (VBIOS 94.02.42.00.2B with ResizableBar capability - see GPU-Z screenshot) BIOS settings : - CSM : disabled - Above 4G : enabled - C.A.M. : enabled I still get the 5 beeps and no display. I also have to clear CMOS in order to get my display back. I tried plugging my monitor into every GPU outputs in turn (DP 1, DP 2, DP 3, hdmi) but the machine still emits 5 beeps and nothing more happens. Is there any known bugs with this beta BIOS? |
Posted By: ASRock_TSD
Date Posted: 29 Jun 2021 at 4:39pm
|
Hi Badaz, Thank you for your testing. Because we don't have MSI RTX 3080 Ventus 10GB OC in our lab, we tested MSI RTX 3070 Ventus 8GB OC instead of it. The system can boot up and working fine with C.A.M enabled. Here is our test config: 7820K X299 Killer SLI/ac 2.00B MSI RTX 3070 Ventus 8GB OC with resizable-bar vBIOS We recommend contacting MSI to check if they have any advice about this question. All the best ASRock TSD |
Posted By: badaz
Date Posted: 29 Jun 2021 at 11:53pm
Hello, I just got an answer from MSI support who told me that this GPU (MSI RTX 3080 Ventus 10GB OC) with this VBIOS (94.02.42.00.2B) was fully compatible with ResizableBar, and that I should ask Asrock support... Well, if you do not have an MSI RTX 3080 Ventus for testing then I guess I'm screwed until you have one? |
Posted By: Florin9doi
Date Posted: 08 Jul 2021 at 5:26am
Hello, you have anything prepared for Taichi XE? |
Posted By: MACHWC
Date Posted: 08 Jul 2021 at 10:28pm
|
Hi, I would like a Resizable Bar BIOS for the X299E-ITX/ac. Thank you! |
Posted By: ASRock_TSD
Date Posted: 09 Jul 2021 at 6:24pm
|
Hi Florin9doi and MACHWC, Thank you for your post. In the near future, we will upload the BIOS of the X299 platform that supports the CAM function to the official website, please stay tuned to our BIOS support page. https://www.asrock.com/support/index.asp?cat=BIOS" rel="nofollow - https://www.asrock.com/support/index.asp?cat=BIOS All the best ASRock TSD |
Posted By: Fernando Gomes Zefer
Date Posted: 24 Jul 2021 at 4:37am
| Good evening! I have a Taichi CLX x299, I want to know when will the bios update for Resizable BAR support come out? Competitors all already have support for the x299 line. Asrock always falling behind. :( |
Posted By: Florin9doi
Date Posted: 24 Jul 2021 at 4:45am
|
It's already available here: https://www.asrock.com/support/index.asp?cat=bBIOS" rel="nofollow - https://www.asrock.com/support/index.asp?cat=bBIOS or here: https://www.asrock.com/MB/Intel/X299%20Taichi%20CLX/index.asp#BIOS" rel="nofollow - https://www.asrock.com/MB/Intel/X299%20Taichi%20CLX/index.asp#BIOS if you scroll to bottom |
Posted By: michal777
Date Posted: 05 Aug 2021 at 3:36am
Hello, what about the X299 Extreme4 motherboard? I'm unhappy to see that a lot of x299 (all?) mobos received the CAM update but not mine... |
Posted By: arcam007
Date Posted: 09 Sep 2021 at 10:59pm
| I'm looking for an Asrock X299 Taichi XE BIOS to enable the RTX3090 "NVIDIA Resizable BAR" function. Where can i found it, please ? |
Posted By: arcam007
Date Posted: 14 Sep 2021 at 1:40pm
| When can wa got an Asrock X299 Taichi XE BIOS to enable the RTX3090 "NVIDIA Resizable BAR" function. Where can i found it, please ? |
Posted By: Gamer313
Date Posted: 16 Sep 2021 at 6:35am
https://asrock.com/MB/Intel/X299%20Taichi%20XE/index.asp#BIOS" rel="nofollow - https://asrock.com/MB/Intel/X299%20Taichi%20XE/index.asp#BIOS 1.90B at the bottom under 'Beta BIOS'. |
Posted By: Milkman
Date Posted: 02 Feb 2022 at 5:37am
|
I note that the downloads section for the ASrock Taichi x299 now has a new BETA BIOS for the CAM function -- 2.50B. I have read this forum, and I've downloaded the BIOS update, but I wanted to ask -- has anybody tried the 2.50B BIOS for CAM / resizable BAR for Nvidia 3080 series GPUs? I have read that some have had issues after trying the last CAM BIOS versions (1.90B, P2.00B), but I don't see any feedback from 2.50B. I want to install and test this, but will not if there has not been testing done for the 3080 series GPUs. |
Posted By: Milkman
Date Posted: 05 Feb 2022 at 3:14am
| No feedback from mods, ASrock support, or other users on x299 Taichi + BIOS version 2.50B used with nvidia 3080 GPUs + resizable BAR? Should I send an email to support? I wont bother with this, if this has been abandoned. |
Posted By: Playman325
Date Posted: 25 Nov 2022 at 11:51pm
| I was just wondering why the extreme4 variant didn?™t get this but every other variant did get it, can anyone tell me the status of the extreme4 version getting it? I really need it before my new graphics card comes in. |
Posted By: namitazop
Date Posted: 24 Dec 2022 at 4:47pm
|
I would like bios for x299 Taichi to |
Posted By: namitazop
Date Posted: 27 Dec 2022 at 6:54pm
|
My understanding was that 'Fast Boot' didn't use CSM, and since 'Fast Boot' hides the CSM option, it cannot be disabled. https://techzpod.com/how-to-say-numbers-in-roblox/" rel="nofollow - roblox numbers https://get-mobdrovip.com" rel="nofollow - get-mobdrovip.com ------------- https://techzpod.com/how-to-say-numbers-in-roblox/" rel="nofollow - roblox numbers https://get-mobdrovip.com" rel="nofollow - get-mobdrovip.com |
Posted By: ThunderKeg
Date Posted: 12 Feb 2024 at 7:35pm
|
Hi AsRock Team May you please create a bios update for the the X299M Extreme4? For some reason the X299 Extreme4 has all the updates while the "M" Version is still at Bios Ver.1.50 A lot still use the HDET platform from intel since there is no information about any new CPUS in the near future. X299 Extreme4 (Has Newer Bios with Rebar) https://www.asrock.com/MB/Intel/X299%20Extreme4/index.asp#BIOS" rel="nofollow - https://www.asrock.com/MB/Intel/X299%20Extreme4/index.asp#BIOS X299M Extreme4 (No Rebar Bios) https://www.asrock.com/MB/Intel/X299M%20Extreme4/index.asp#BIOS" rel="nofollow - https://www.asrock.com/MB/Intel/X299M%20Extreme4/index.asp#BIOS Regards, Bill Ecrofeg |