J5040-ITX with PCIe SATA Controller Problem
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19055
Printed Date: 24 Nov 2024 at 1:51am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: J5040-ITX with PCIe SATA Controller Problem
Posted By: blueshadow
Subject: J5040-ITX with PCIe SATA Controller Problem
Date Posted: 10 Jun 2021 at 9:33pm
|
Hi everyone I just bought a J5040-ITX motherboard to upgrade my existing NAS system. As on the old motherboard, I wanted to run Ubuntu from a SATA SSD and connect 4 SATA data HDDs in Software RAID 5. Since the motherboard has only four SATA ports, I added a additional PCI Express SATA Controller (Delock 90392, uses an Asmedia ASM1061R chip). I chose this controller since the board already incorporates a ASM1061 SATA controller. I connected the SSD to the internal SATA3_1 port and the first two data HDDs to the internal SATA3_A1 and SATA3_A2 ports. The SSD and the two HDDs are recognized and show up in the BIOS and also in Ubuntu. The other two HDDs are connected to the PCIe SATA controller. Now, the SATA controller does not seem to be recognized in the BIOS. The two HDDs do not show up in the BIOS. In Ubuntu, I also do not see the two HDDs and I do not get the /dev/sd*. However, the in the "lspci" output the controller is listed. - Has anyone successfully used such a setup with an additional PCIe SATA controller? - Should the PCIe SATA controller and the two HDDs show up in the BIOS? - Any tip on what I am missing? I would appreciate any help. Thx, blue |
Replies:
Posted By: redgoblin
Date Posted: 04 Dec 2021 at 7:38pm
|
Hi blueshadow, I have the exact same problem using ASM1061 PCI-SATA Controller on J5040 Board. The device is also listed in lspci, but the connected disk is not showing up in BIOS or OS. I'm using openmediavault resp. Debian. Since the post is already a few month old, have you already been able to solve the problem? If so, it would be really nice if you could let me know what worked for you. Otherwise, I will let you know when I can fix it  |
Posted By: redgoblin
Date Posted: 05 Dec 2021 at 12:36am
|
UPDATE: After testing a bit more, I found out that controller and mainboard are actually working well, although the SATA ports of the controller still don't show up in BIOS. It turned out that the (new) HDD I was trying to connect was broken  Sorry I couldn't help with your actual problem. |
Posted By: dumy13
Date Posted: 14 Sep 2022 at 7:34pm
|
Hi guys, Quote from the official product page: "*USB3_0_1 and USB_0_1 cannot be occupied simultaneously. Please connect a USB cable to one of these headers only." Direct link: https://www.asrock.com/MB/Intel/J5040-ITX/index.asp#Specification" rel="nofollow - https://www.asrock.com/MB/Intel/J5040-ITX/index.asp#Specification |