TPM 2.0 support and Windows 11 (AMD)
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19152
Printed Date: 01 Sep 2024 at 9:56am Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: TPM 2.0 support and Windows 11 (AMD)
Posted By: Xaltar
Subject: TPM 2.0 support and Windows 11 (AMD)
Date Posted: 25 Jun 2021 at 9:19pm
Hi all, just a quick sticky to inform our members regarding TPM 2.0 support for Windows 11.
On AMD side anything older than Ryzen (AM4) will likely not be compatible with Windows 11.
This is as things currently stand as of 25/06/2021
-------------
|
Replies:
Posted By: Middcore
Date Posted: 26 Jun 2021 at 11:00am
So how does one go about enabling fTPM on modern AsRock boards? B550 for example?
|
Posted By: T1125P
Date Posted: 26 Jun 2021 at 12:33pm
Xaltar wrote:
Hi all, just a quick sticky to inform our members regarding TPM 2.0 support for Windows 11.
On AMD side anything older than Ryzen (AM4) will likely not be compatible with Windows 11.
This is as things currently stand as of 25/06/2021 |
I should be ok then. I'm using a x470 taichi. I never paid attention to TPM but is that located in the security section in the BIOS? I don't remember the actual setting name.
------------- x470 Taichi v5.10 5800X3D (Scythe Mugen 5 Rev.B) G.SKILL Flare X Series (8GBx4) 32GB 3200 CL14 970 Evo 1TB+SK Hynix 2TB PNY RTX 4070 Super SoundBlaster AE-7 EVGA 850W Platinum LG WH16NS40 AOC Q24G2A
|
Posted By: Wekita
Date Posted: 26 Jun 2021 at 9:10pm
Woa, does that mean my 970A-G/3.1 will not be able to run Win11?
|
Posted By: T1125P
Date Posted: 27 Jun 2021 at 7:48am
Found this on GitHub, it will tell you exactly why your PC cannot run Win 11, not that useless MicroSoft one lol. https://github.com/rcmaehl/WhyNotWin11" rel="nofollow - https://github.com/rcmaehl/WhyNotWin11 As you can see mine all checks out except TPM. https://ibb.co/FX3vs1W" rel="nofollow - https://ibb.co/FX3vs1W I believe this setting is in the security section of the bios on x470 but it doesn't exactly say TPM.
------------- x470 Taichi v5.10 5800X3D (Scythe Mugen 5 Rev.B) G.SKILL Flare X Series (8GBx4) 32GB 3200 CL14 970 Evo 1TB+SK Hynix 2TB PNY RTX 4070 Super SoundBlaster AE-7 EVGA 850W Platinum LG WH16NS40 AOC Q24G2A
|
Posted By: CopyThat
Date Posted: 27 Jun 2021 at 4:56pm
I found Enabling AMD fTMP switch in the BIOS,on my Ryzen 7 3800X allows me to install will,(according to the Windows PC Health Check),allow me to install Windows 11.
------------- ASRock Z790 Pro DDR5,BIOS 9.08,32Gig.G Skill F5-5600J3636C16GRS,GTX 1050Ti
|
Posted By: T1125P
Date Posted: 28 Jun 2021 at 6:30am
CopyThat wrote:
I found Enabling AMD fTMP switch in the BIOS,on my Ryzen 7 3800X allows me to install will,(according to the Windows PC Health Check),allow me to install Windows 11. |
Ah, ok nice let me know how it goes. Also the fTPM switch is located in the BIOS security tab? You have a x570 as I have a x470 but it should be in the same place.
------------- x470 Taichi v5.10 5800X3D (Scythe Mugen 5 Rev.B) G.SKILL Flare X Series (8GBx4) 32GB 3200 CL14 970 Evo 1TB+SK Hynix 2TB PNY RTX 4070 Super SoundBlaster AE-7 EVGA 850W Platinum LG WH16NS40 AOC Q24G2A
|
Posted By: CopyThat
Date Posted: 28 Jun 2021 at 1:50pm
In my MB BIOS Advanced CPU Configuration AMD fTPM Switch Switch to AMD CPU fTPM Check this YouTube Video https://youtu.be/taZTeXRvwFQ" rel="nofollow - https://youtu.be/taZTeXRvwFQ
------------- ASRock Z790 Pro DDR5,BIOS 9.08,32Gig.G Skill F5-5600J3636C16GRS,GTX 1050Ti
|
Posted By: T1125P
Date Posted: 28 Jun 2021 at 3:27pm
CopyThat wrote:
In my MB BIOS Advanced CPU Configuration AMD fTPM Switch Switch to AMD CPU fTPM Check this YouTube Video https://youtu.be/taZTeXRvwFQ" rel="nofollow - https://youtu.be/taZTeXRvwFQ
|
Oh, thanks a lot I will check out that video, and I will look in my BIOS for that setting.
------------- x470 Taichi v5.10 5800X3D (Scythe Mugen 5 Rev.B) G.SKILL Flare X Series (8GBx4) 32GB 3200 CL14 970 Evo 1TB+SK Hynix 2TB PNY RTX 4070 Super SoundBlaster AE-7 EVGA 850W Platinum LG WH16NS40 AOC Q24G2A
|
Posted By: BrianGrier
Date Posted: 29 Jun 2021 at 1:13am
I have enabled fTPM and Secure Boot, along with disabling CSM and the W11 Health check does not recognize TPM 2.0
I have:
B550M-ITX/ac motherboard Ryzen 5 5600X Windows 10 Pro
I have not yet updated the BIOS so that is as it came from the factory.
|
Posted By: RLGL
Date Posted: 29 Jun 2021 at 9:16pm
Is there a header on the board for it? If so you will have to purchase an add on card. That is the situation for the X570 Taichi.
------------- Asrock Z370 Gaming K6,Intel i7 8700K, Asrock x570 Taichi
|
Posted By: Khun_Doug
Date Posted: 30 Jun 2021 at 3:59am
Two notes on the TPM / fTPM thing. First, Microsoft pulled the PC Health Check App. They claim it was not ready, but will make it available again, closer to the launch of Windows 11.
The second thing is that I have a Windows 10 VM that did not pass the PC Health Check. But that same VM successfully installed the Insider Preview of Windows 11, build 22000.
For now, lack of TPM will not prevent Windows 11 preview from running.
|
Posted By: T1125P
Date Posted: 01 Jul 2021 at 3:05am
I just found the setting on my x470 in the BIOS. Now it says Win 11 ready. https://ibb.co/6DgP6ng" rel="nofollow - https://ibb.co/6DgP6ng Use the tool WhyNotWin11 that will give more accurate results.
Also just upgraded to a 5950x :)
------------- x470 Taichi v5.10 5800X3D (Scythe Mugen 5 Rev.B) G.SKILL Flare X Series (8GBx4) 32GB 3200 CL14 970 Evo 1TB+SK Hynix 2TB PNY RTX 4070 Super SoundBlaster AE-7 EVGA 850W Platinum LG WH16NS40 AOC Q24G2A
|
Posted By: SquirlyTech
Date Posted: 02 Jul 2021 at 11:53am
Well then I am happy to report that dont need anything for my Taichi x570 board, I am currently getting ready for windows 11, system is downloading it as I type this. All I did was first update bios (there is a bran new update). Then went to security and made sure secure boot was enabled. and lastly I went to the advanced tab un CPU configuration and at the bottom for tpm i enable amd Ftmp. and boom, I was ready for 11.
------------- Have a Great and Blessed Day!
|
Posted By: Xaltar
Date Posted: 02 Jul 2021 at 12:54pm
Thanks for the info SquirlyTech.
-------------
|
Posted By: J Z
Date Posted: 02 Jul 2021 at 4:46pm
https://www.jzelectronic.de/jz2/forum.php?act=39835" rel="nofollow - https://www.jzelectronic.de/jz2/forum.php?act=39835
------------- Kind Regards, JZ
https://shop.JZelectronic.de - Der Shop mit ausgesuchter ASRock Profi Hardware
https://www.facebook.com/asrock.de
|
Posted By: intellimoo
Date Posted: 06 Jul 2021 at 3:37am
Wekita wrote:
Woa, does that mean my 970A-G/3.1 will not be able to run Win11? ![](smileys/smiley18.gif) |
That is correct, just like that.
|
Posted By: Fantomassk
Date Posted: 21 Sep 2021 at 8:02pm
Same experience i have to update to never bios enable secure boot trusted computing and amd ftp and voila. tPM works windows 11 installs
|
Posted By: bobbypty
Date Posted: 24 Sep 2021 at 11:25pm
Hello everyone,
I have a ASRock B550M-ITX/AC, did a fresh UEFI Windows 10 install, enabled secure boot and also enabled AMD CPU fTPM in the BIOS but still can't get the Windows 11 checker to validate the TPM and I still get an error for it. All the other checks are OK.
CPU is a AMD Ryzen 5 3600 and I built the rig in January 2021.
Still running the BIOS that came from the factory and have not attempted to upgrade it yet.
Anyone has the same issue?
|
Posted By: Fantomassk
Date Posted: 25 Sep 2021 at 12:16am
Dont forget to enable trusted computing if no success update bios
|
Posted By: bobbypty
Date Posted: 25 Sep 2021 at 12:19am
I was able to fix it by upgrading the BIOS to version 1.80
Quite scary due to the risk of bricking the motherboard but now the PC passes all Windows 11 checks.
|
Posted By: grandemister
Date Posted: 17 Oct 2021 at 9:24pm
Hi I have an AsRock x470 Taichi Ultimate the TPM 2.0 I activated without problems, but I can not activate secure boot, who can help me? Thanks
|
Posted By: grandemister
Date Posted: 17 Oct 2021 at 9:27pm
Posted By: wiredawg
Date Posted: 26 Jan 2022 at 7:03am
Note for ASRock x570 Taichi (AMD Ryzen 9): Simply turning/enabling "AMD CPU fTPM" did not work for me. I had to update my existing BIOS from P3.4 to P4.6. The update page at asrock.com says "Support Microsoft Windows 11". Once I updated the BIOS I did not need to go back into the BIOS to change any settings. TPM shows up when checking with windows 10. Type: tpm.msc in the run-box (press window key & R at the same time to open the run-box). It will either say ready or not ready.
------------- ASRock X570 Taichi (BIOS P4.6) AMD Ryzen 9 3900 NVIDIA GeForce GTX 1660 Super
|
|