AMD Motherboards - ROMED8-2T

Print Page | Close Window

ROMED8-2T

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19239
Printed Date: 22 Dec 2024 at 11:16am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: ROMED8-2T

Posted By: kodiak
Subject: ROMED8-2T
Date Posted: 13 Jul 2021 at 6:35am

ROMED8-2T NO VIDEO. I've built a couple of PCs for vast.ai earlier, and decided to go full out with ROMED8-2T. 256 GB memory, 24 core EPYC, 5 RTX 3090s - the works. Got no video at any time, either from the inbuilt D-SUB nor from connected cards. So, installation is difficult. I can hear the hard drive ticking a bit, the Dr Debug code is 00 (presumably meaning OK), the heartbeat LED blinks. I can log into the IPMI, but also using the KVM I get no video. Have tried to F2 into the bios when starting up via IPMI, no joy. Has anyone encountered something similar? Any suggestions? I'm not a complete noob, but not that advanced either. This might be quite simple. Or the MBB might be broken?

Replies:

Posted By: kodiak
Date Posted: 13 Jul 2021 at 7:15am

(I've tried this with and without GPUs, looking for video output from onboard DSUB and from GPUs.)

Posted By: Xaltar
Date Posted: 13 Jul 2021 at 12:04pm

Code 00 indicates no CPU detected. Likely a simple matter of the CPU not being
properly installed/seated. It's the most common cause for the 00 code on Epyc and
Threadripper systems as the socket(s) can be tricky to work with.

-------------

Posted By: kodiak
Date Posted: 13 Jul 2021 at 9:31pm

Thanks, much appreciated. That must be it!

Posted By: kodiak
Date Posted: 15 Jul 2021 at 12:45am

It turned out I had used a processor that wasn't compatible, I had misunderstood a numbering convention. Expensive mistake!

Posted By: ArtemTeremkov
Date Posted: 12 Oct 2021 at 4:40am

kodiak wrote:

It turned out I had used a processor that wasn't compatible, I had misunderstood a numbering convention. Expensive mistake!

Hi. please tell me which processor did not fit? I am thinking of buying ROMED8-2T for EPYC 7551, and reflashing BIOS to version 1.30 (the technical documentation indicates support for these processors).