Intel Motherboards - H110M-DGS R3.0 Dual Channel doesn't work work

Print Page | Close Window

H110M-DGS R3.0 Dual Channel doesn't work work

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19302
Printed Date: 28 Apr 2024 at 7:32pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: H110M-DGS R3.0 Dual Channel doesn't work work

Posted By: Manospetrucci
Subject: H110M-DGS R3.0 Dual Channel doesn't work work
Date Posted: 24 Jul 2021 at 11:22pm

Greetings,

For more 15 months now, I used Single Channel memory mode with one Memory stick slotted on B1 as the manual dictates "in case you are goin to use one slot". Not A1, but B1. PC was running smoothly, no problems. (Note: Although this specific model it is not listed in Memory Support page, it worked without problems).

A few days ago, I decided to buy another RAM memory stick, the same exact model and upgrade to 16?GB in dual channel mode.
Unfortunately, it is not working. I tested on B1 slot each stick and both work fine in single channel, but when both sticks are slotted, PC won't boot, meaning not even BIOS boot. Although I was already updated to 7.50 BIOS version, I re-flashed the latest firmware, nothing changed. I also tried a dual channel kit that I use to my other computer, again the same behavior. Single channel booted, dual channel DID NOT.

Is this a malfunction or is there a work-around ?