red led on z170 extreme 4 always ON
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1939
Printed Date: 26 Dec 2024 at 12:44pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: red led on z170 extreme 4 always ON
Posted By: deadman
Subject: red led on z170 extreme 4 always ON
Date Posted: 06 Feb 2016 at 8:44pm
|
Hi guys I have a question On my asrock z170 extreme 4 i see the red light of RESET, OFF and BIOS A always on... In the bios setting, in chipset settings i have turned off the voice that regard this, but the lights still lit... Is there a problem?? Thanks a lot Carmelo 
------------- my build: -cpu i5 6500 -z170 extreme 4 -2x8 kingston savage cl12 2400 mhz -r9 380 4gb sapphire nitro -coolermaster v550s -thermaltake commander g41 |
Replies:
Posted By: Xaltar
Date Posted: 06 Feb 2016 at 10:29pm
|
Check your BIOS selection switch, it looks like it may be set to BIOS B, it should be set to BIOS A. ------------- 
|
Posted By: deadman
Date Posted: 07 Feb 2016 at 1:06am
hi xaltar thanks for the reply, the bios is set to A1 ... i have downloaded GOODNIGHT LED from asrock appshop ...now all leds are off... but i want to disable only the internal led of the motherboard...with that app it disable even the power led of hdd
 ------------- my build: -cpu i5 6500 -z170 extreme 4 -2x8 kingston savage cl12 2400 mhz -r9 380 4gb sapphire nitro -coolermaster v550s -thermaltake commander g41 |
Xaltar wrote:Posted By: Xaltar
Date Posted: 07 Feb 2016 at 2:03am
|
Are there any codes remaining on your Dr. Debug display after post? Those red LEDs usually indicate some kind of problem with the system. -------------
|
Posted By: deadman
Date Posted: 07 Feb 2016 at 2:12am
|
Nope, Dr debug displaying no numbers... ------------- my build: -cpu i5 6500 -z170 extreme 4 -2x8 kingston savage cl12 2400 mhz -r9 380 4gb sapphire nitro -coolermaster v550s -thermaltake commander g41 |
Posted By: deadman
Date Posted: 07 Feb 2016 at 3:57am
|
update: after i clear the cmos with the button, the situation has changed: when i boot in bios mode the leds of RESET, BIOS A1 and OFF are on and the code A6 appears on the dr. debug, but in the manual there is no A6 codes...  when i boot normally, there aren't led lit  maybe the reset from CMOS BUTTON, has solved my problem??
------------- my build: -cpu i5 6500 -z170 extreme 4 -2x8 kingston savage cl12 2400 mhz -r9 380 4gb sapphire nitro -coolermaster v550s -thermaltake commander g41 |