Asrock Z390 PRO4 2X M2 NVME Raid not working
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19478
Printed Date: 27 Apr 2024 at 11:02pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Asrock Z390 PRO4 2X M2 NVME Raid not working
Posted By: peacepowers
Subject: Asrock Z390 PRO4 2X M2 NVME Raid not working
Date Posted: 27 Aug 2021 at 2:19am
|
Hello everyone I bought 2x m2 Samsung 980 NVME and put them both in only I tried everything to get them both in Raid 0 only when I go into raid mode I only see the normal sata drives. I also called Asrock support nederland and after investigation they told me it would work because they tested it. Unfortunately I can't get it to work. Does anyone here know what is causing this ? 2 m2 slots and not even being able to put them in Raid 0. The normal sata slots are not being used either Bios version P4.70 First had Bios p4.40 with a bios update did not help either. hope someone here can tell me what I am doing wrong. 
|
Replies:
Posted By: ASRock_TSD
Date Posted: 03 Sep 2021 at 7:31pm
|
Hi peacepowers, Thank you for your post. There are two ways to build the RAID volume with nvme SSD. Please refer to the below link to set up your RAID volume. https://download.asrock.com/Manual/RAID/Z490%20Extreme4/English.pdf" rel="nofollow - RAID guide Also, We recommend removing other storage before creating the RAID volume. All the best ASRock TSD |