Booting problems
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19533
Printed Date: 08 May 2024 at 2:47am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Booting problems
Posted By: Cyberino
Subject: Booting problems
Date Posted: 09 Sep 2021 at 4:52pm
Hello,
I recently got a new PC, and my problem is, when i press the power button, the dram led on my mainboard is on for exactly 30 sec, then it boots like normal an I could use the PC. I read others fixed the problem with other ram sticks, already tried that, but doesn't fix the problem for me.
My current specs:
ASRock Z590 Pro4
i7-11700K
Zotac RTX 2070 Super
32GB (2x 16384MB) G.Skill Aegis DDR4-3200 DIMM CL16-18-18-38 (F4-3200C16D-32GIS)
Sorry, when my English isn't good.
But maybe someone here could help me find the source of the problem.
Thanks in advance
|
Replies:
Posted By: The_Nephilim
Date Posted: 10 Sep 2021 at 8:45am
Have you tried booting with just 1 RAM stick to see if either have an issue when booting?
You are in the proper slot for your RAM?
|
Posted By: Cyberino
Date Posted: 10 Sep 2021 at 5:22pm
I just tested booting with 1 ram stick, for each slot but still always the same problem.
I am using ram slot a2 and b2, as the manual says they are priority 1.
|
Posted By: The_Nephilim
Date Posted: 10 Sep 2021 at 9:44pm
|
So you are saying it hangs on post for 30seconds then boots?? If so have you changed settings in BIOS? Perhaps try a reset of BIOS.
|
Posted By: Cyberino
Date Posted: 10 Sep 2021 at 11:58pm
thanks.
so i reset the bios and also found the setting which causes the problem.
I set the ram to DDR4-3200, because the ram max speed is 3200 and the max ram speed the cpu should be able to handle is also 3200.
I tested a bit and found that DDR4-2933, is the highest setting which doesn't cause the problem, but still i don't understand why 3200 is causing problems.
|
Posted By: The_Nephilim
Date Posted: 11 Sep 2021 at 1:10am
|
Are you using the XMP Profile
|
|