Intel Motherboards - Fatal1ty Z270 Gaming K6 Series Error

Print Page | Close Window

Fatal1ty Z270 Gaming K6 Series Error

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19536
Printed Date: 24 Jul 2025 at 9:07am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Fatal1ty Z270 Gaming K6 Series Error

Posted By: chamap
Subject: Fatal1ty Z270 Gaming K6 Series Error
Date Posted: 10 Sep 2021 at 6:44am

I am unable to contact tech support about this board as it seems to be too old. I reach out for help here.

I get two sharp beeps after booting the computer. I am unable to determine what it means. I am running this board in the basic (that is un-tweaked) mode with the original bios. At first, I thought the problem was related to memory so I ran windows 10 memory test. It said I had a bad memory so I replaced all four chips with new Corsair Vengeance chips of the same specification. I also cleaned the heatsink, fans, and filters. I removed and reseated all cards and connectors.

I do not get a blue-screen error but I still get the 2-beeps. Suggestions appreciated.

-------------
CHAMAP

Replies:

Posted By: The_Nephilim
Date Posted: 10 Sep 2021 at 8:48am

Well I think 2 beeps means memory bad.. If you replaced the memory it might be the slots are bad or dead..

have you tried using 1 slot of memory?

Posted By: chamap
Date Posted: 10 Sep 2021 at 9:40am

No, but I will try one chip at a time. Then I have to use memory in pairs to test slots.

I'll report back. Thanks

-------------
CHAMAP

Posted By: The_Nephilim
Date Posted: 10 Sep 2021 at 10:05am

yes I mean just try 1 stick in the 1st slot.