b550m steel legend led start flashing/blinking
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19555
Printed Date: 05 May 2024 at 12:11pm Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: b550m steel legend led start flashing/blinking
Posted By: Djaxlil
Subject: b550m steel legend led start flashing/blinking
Date Posted: 13 Sep 2021 at 7:40pm
My matherbord led start flashing after turning off the psu i even tried to remove all the cables it works normally but sometimes when i shut it off it start blinking and never stops till i plug it back and turn the psu on
|
Replies:
Posted By: ASRock_TSD
Date Posted: 14 Sep 2021 at 11:54am
Dear Djaxlil, Thank you for choosing ASRock and contacting us.
For this case, we would suggest flashing the RGB firmware manually to try. Please refer to the following steps.
1.Uninstall the ASRock Polychrome and other RGB control program in Control Panel and make sure the ASRRGB folder in C:\Program Files (x86)\ASRock Utility\ is disappear.
2. Restart the PC and download the latest ASRock Polychrome utility from below link and install it. ASRock Polychrome RGB ver:2.0.107: https://download.asrock.com/Utility/RGB/PolychromeRGB" rel="nofollow - https://download.asrock.com/Utility/RGB/PolychromeRGB (v2.0.107).zip
3. Type "CMD" in Windows search bar and right click to choose "Run as administrator".
4. Go to RGB app installation folder in Command Prompt by typing "cd C:\Program Files (x86)\ASRock Utility\ASRRGBLED\Bin"
5. Flash the RGB chip by using the following command "WriteFW.bat"
After step 5, kindly wait about 30 sec and the FW flash will finish.
Thank you,
Best wishes, ASRock TSD
|
Posted By: BrincosNation
Date Posted: 17 Sep 2021 at 8:07am
ASRock_TSD wrote:
Dear Djaxlil, Thank you for choosing ASRock and contacting us.
For this case, we would suggest flashing the RGB firmware manually to try. Please refer to the following steps.
1.Uninstall the ASRock Polychrome and other RGB control program in Control Panel and make sure the ASRRGB folder in C:\Program Files (x86)\ASRock Utility\ is disappear.
2. Restart the PC and download the latest ASRock Polychrome utility from below link and install it. ASRock Polychrome RGB ver:2.0.107: https://download.asrock.com/Utility/RGB/PolychromeRGB" rel="nofollow - https://download.asrock.com/Utility/RGB/PolychromeRGB (v2.0.107).zip
3. Type "CMD" in Windows search bar and right click to choose "Run as administrator".
4. Go to RGB app installation folder in Command Prompt by typing "cd C:\Program Files (x86)\ASRock Utility\ASRRGBLED\Bin"
5. Flash the RGB chip by using the following command "WriteFW.bat"
After step 5, kindly wait about 30 sec and the FW flash will finish.
Thank you,
Best wishes, ASRock TSD |
hi, why b550 cant customize led by led, like b450m does?? i mean, b450m can customize leds with different colors in the same component, b550 is not able, how can i fix this?
|
|