Print Page | Close Window

B250M Pro4 & WD Blue 3D NAND SATA SSD M.2 2280

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19614
Printed Date: 29 Mar 2024 at 4:58pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: B250M Pro4 & WD Blue 3D NAND SATA SSD M.2 2280
Posted By: rocky
Subject: B250M Pro4 & WD Blue 3D NAND SATA SSD M.2 2280
Date Posted: 23 Sep 2021 at 7:28am
Bought this SSD because the model appears in the Ultra M.2_SSD (NGFF) Module Support List:

WD     500GB     SATA3     2280     WDS500G2B0B-00YS70

This MOBO has x2 M.2 slots, but only M.2_1 accepts SATA modules.

In the UEFI BIOS the M.2_1 slot appears as "Not detected".

Slots SATA3_0, SATA3_1, and SATA3_3 are occupied, but the M.2 drive will replace the drive in SATA3_1.

According to the manual the M.2 SATA drive goes into the M.2_1 slot and there are no issues with the other three SATA3 drives, except for SATA3_0.

Only card is the graphics card at PCIe slot.



Replies:
Posted By: rocky
Date Posted: 23 Sep 2021 at 8:04am
To avoid conflicts removed the drive at SATA3_0 to SATA3_1.

But the system still can detect the new M.2 drive at M.2_1.


Posted By: rocky
Date Posted: 23 Sep 2021 at 10:02am
Had to move the drive at SATA3_0 anyway because it was the boot drive.

Still the M.2 drive wasn't detected.

Removed the M.2 drive and reinserted like the first time, but this time it was recognized.

Just in case, loaded UEFI default values. Some recommend disabling CSM, but in the past it caused graphics issues on boot with a new graphics card. Will try again.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net