H510 pro problem
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19626
Printed Date: 23 Jul 2025 at 6:03am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: H510 pro problem
Posted By: saboo
Subject: H510 pro problem
Date Posted: 24 Sep 2021 at 11:27pm
|
Hello everyone I'm having alot of trouble with this motherboard and im hoping to get some help  The following is my setup....Corsair RM850 gold RTX 3060TI Windows 10 X64 intel i7 10700 Kingston 16GB KVR32N22D8/16 Sandisk X400SD8SN8U 120GB M.2 BIOS- 1.30 I can't get a stable OS. The rig works OK for about 5 minutes sometimes less then the screen freezes everytime. I've tried reinstalling the OS multiple times with no luck. |
Replies:
Posted By: saboo
Date Posted: 25 Sep 2021 at 12:07am
|
Any help with this would be well appreciated.Im a noob at this so i need all the help i can get
|
Posted By: Xaltar
Date Posted: 25 Sep 2021 at 1:08am
|
Is this the H510 Pro BTC+ you are talking about here? That is the only H510 ASRock board with Pro in it's name otherwise you are talking about MSI's H510M Pro in which case you are on the wrong forum  ------------- 
|
Posted By: saboo
Date Posted: 25 Sep 2021 at 1:14am
|
Opps sorry should have made it more clear. It is the H510 Pro BTC+. |
Posted By: Xaltar
Date Posted: 25 Sep 2021 at 3:03am
|
I wouldn't use an i7 in a board designed for mining. While it's technically supported the board's power delivery is tailored more for low end, lower power CPUs. That said, you can try firing off a support ticket to ASRock Tech Support: https://event.asrock.com/tsd.asp" rel="nofollow - https://event.asrock.com/tsd.asp -------------
|
Posted By: saboo
Date Posted: 25 Sep 2021 at 3:08am
|
Too be honest i was thinking about the cpu and its power but i wasnt sure.Its good to here it from someone else. Its something to think about.Thanks i will contact support.
|
Posted By: Tranerich
Date Posted: 29 Sep 2021 at 3:13am
| What was the outcome ? I?™m currently having this problem too |
Posted By: saboo
Date Posted: 29 Sep 2021 at 3:17am
| Long story short,it is the CPU.Too powerful for the board. So fixed the problem short term by underclocking the CPU and it worked a treat. The other way round it is to buy a lesser CPU. I hope this helps.... |
Posted By: WAVE69
Date Posted: 13 Nov 2021 at 9:01pm
|
First time using ASrock H510 Pro BTC. Im using it with 6 x MSI GTX 1660 Ti 6GB and for cpu Intel G6400. When im booting from HiveOS all gpu's running (fans working) but when the miner starts only one gpu gains mh and also on hiveOS dashboard one gpu seems to work and the other are "missing units" Check bios for Above 4G decoding and the option was set on Enable. Everyone know how to fix this or maybe a guide to try something new? |
Posted By: Xaltar
Date Posted: 13 Nov 2021 at 11:37pm
|
Other than enabling "above 4g" the only other thing is making sure CSM is disabled. -------------
|
Posted By: WAVE69
Date Posted: 14 Nov 2021 at 12:18am
|
Thank you. I will try that. Any other suggestion? As i said , all fans of the gpus spinning on the start then only one remains and this card is the only visible on hiveos with mh's. The others are with indicator "missing unit" |
Posted By: Xaltar
Date Posted: 14 Nov 2021 at 1:31am
|
I am not familiar with the OS you are using but to use multiple GPUs on your board (and most BTC boards) you need to have CSM disabled, it interferes with the way the cards initialize. I suspect if it's enabled then that is your problem. -------------
|