H510 Pro no BIOS
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19719
Printed Date: 03 May 2024 at 6:25am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: H510 Pro no BIOS
Posted By: Bobberetic
Subject: H510 Pro no BIOS
Date Posted: 19 Oct 2021 at 2:55pm
Hi,
I have seen a few people post this on Reddit, but no one had a solution.
I have a H510 Pro BTC+ board with a Intel Core i3 10100F which does not have an integrated graphics processing unit.
If I start the rig without at least 1 gpu connected I get 4 beeps. When I connect a GPU and plug the monitor into that, I get no beeps, but I also get no BIOS screen.
Do I need to buy a different CPU with integrated graphics? Will that solve my issue?
|
Replies:
Posted By: roberto00713
Date Posted: 22 Oct 2021 at 4:02pm
Hi!
I have the same configuration and the same problem.
I have using RTX 3090 card & RX 6600 card.
When power off the system and want to power on, the ventilator are starting but I have no screen.
Inserting 1 graphic card and reseting the BIOS is the same.
But after I change on the other graphic card the system is starting (inserted only one card).
After power off and starting there is no screen, (the same situation).
Changing back on the other graphic card the system is starting, but on the first shut down is the same situation!
So I don't understand what is the problem when I shut down my pc?
|
Posted By: Bobberetic
Date Posted: 26 Oct 2021 at 11:58am
Heya roberto,
I think I found a fix, but you ain't gona like it :P
After reading a lot of other posts I figured out that everyone with our issue was using a F-CPU. I bought the i3-10100 cpu WITH integrated graphics and everything runs perfect now. Only trouble is, now my GPUs aren't registering in device manager :/
|
Posted By: emadmust
Date Posted: 28 Jan 2022 at 1:48am
I have PCU i5 10400F, with 8GB DDR Ram 32000 buses, I initially believed the issue between both capability as per the AssRock documentation, and I never get the display, did all my research and figured out that it require bios update, so is there anyway I can updated the bios without using the screen display, like using flash drive (USB).
if yes, any advise on the step as board not showing its booking from the USB.
|
|