AMD Motherboards - I can't flash my RGB chip

Print Page | Close Window

I can't flash my RGB chip

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19793
Printed Date: 22 Dec 2024 at 11:58am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: I can't flash my RGB chip

Posted By: Megaton
Subject: I can't flash my RGB chip
Date Posted: 07 Nov 2021 at 4:26am

I have B550 pg velocita

The inboard RGB are flickering and i tried to flash it but i got an error message " enter ICP mode fail

Ihave the most recent BIOS update and version of polychrome ..
Can any one help me please ?

Replies:

Posted By: ASRock_TSD
Date Posted: 11 Nov 2021 at 2:19pm

Dear Megaton,
Thank you for the posting.

For this case, we suggest flashing the RGB firmware manually to try.
Please refer to the following steps.

1.Uninstall the ASRock Polychrome and other RGB control program in Control Panel and make sure the ASRRGB folder in C:\Program Files (x86)\ASRock Utility\ is disappear.

2. Restart the PC and download the latest ASRock Polychrome utility from below link and install it.
ASRock Polychrome RGB ver:2.0.109: https://download.asrock.com/Utility/RGB/PolychromeRGB" rel="nofollow - https://download.asrock.com/Utility/RGB/PolychromeRGB (v2.0.109).zip

3. Type "CMD" in Windows search bar and right click to choose "Run as administrator".

4. Go to RGB app installation folder in Command Prompt by typing "cd C:\Program Files (x86)\ASRock Utility\ASRRGBLED\Bin"

5. Flash the RGB chip by using the following command "WriteFW.bat"

After step 5, kindly wait about 30 sec and the FW flash will finish.

Thank you,

Best wishes,
ASRock TSD