Compatible GSkill RAM flop....
Printed From: ASRock.com
Category: Media&User's Review
Forum Name: AMD Motherboards
Forum Description: ASRock AMD Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19892
Printed Date: 19 Apr 2024 at 3:28pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Compatible GSkill RAM flop....
Posted By: Walter69
Subject: Compatible GSkill RAM flop....
Date Posted: 03 Dec 2021 at 2:10pm
Have 2X8GB Gskill Ripsaw 2800 1.2V (16-16-16-36) in a AB350 Pro 4 for a few years(Ryzen 5). Just grabbed 2X8GB GSkill Ripsaw 3200 1.35V (16-18-18-38) to bump up to 32GB total, and can't manually adjust bios to make them come up above 1800MHZ to say 2666MHZ 1.35V(keeps rebooting to default after a couple tries)? Is the compatibility list really that sensitive and this cause is lost? Thanks for your time and response if helpful! 
|
Replies:
Posted By: Xaltar
Date Posted: 03 Dec 2021 at 6:16pm
|
Those are 2 very different models of RAM kit. It's very common for mixed RAM setups to not be able to reach their full XMP speed. That said, try installing only the 3200 kit and enabling XMP, then, manually lower the frequency down to 2666 and then restart. If it works fine and boots into the OS then shut down and install the other kit. You can try mixing the kits so the 2800 kit in A1 and A2 then the 3200 kit in B1 and B2. I have found that sometimes lets you get a bit more out of a mixed setup. ------------- 
|