AMD Motherboards - Fatal1ty B450 gaming ITXac+Ryzen 5 5600G.

Print Page | Close Window

Fatal1ty B450 gaming ITXac+Ryzen 5 5600G.

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19920
Printed Date: 28 Apr 2024 at 12:14am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Fatal1ty B450 gaming ITXac+Ryzen 5 5600G.

Posted By: wz52
Subject: Fatal1ty B450 gaming ITXac+Ryzen 5 5600G.
Date Posted: 09 Dec 2021 at 5:00pm

I have the Fatal1ty B450 Gaming ITXac motherboard running fine with Ryzen 5 2600X as a Linux server, even though there is no graphics support. I have a 4 port NIC card (NC364T) installed in the pci-e slot. The system runs fast, with no issues. I have decided to replace the CPU to use the on-board graphics. I've installed the Ryzen 5 5600G. While the graphics ports now work, the system is very slow. Also, when the 4-port NIC card is installed in the pci-e slot, the networking (the on-board LAN port), and the 4-port NIC become disabled when the Linux boots. It appears there might be some bus resource conflict. When I remove the 4-port NIC the networking works on the built-in LAN interface, but the system runs slow. Again, there are no issues with 2600X CPU. Is this problem caused by BIOS issue, or this motherboard does not support the 5600G correctly, or is this an expected behavior?