B560 Pro4
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19924
Printed Date: 24 Jul 2025 at 8:08am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: B560 Pro4
Posted By: goloma13
Subject: B560 Pro4
Date Posted: 10 Dec 2021 at 8:21am
|
Hello everyone, Glad to be here. I am having a problem with my build. All brand new, no second hand. Specs : mobo asrock 560 Pro4 cpu intel i510400f ram 1 dimm 8GB ddr4 gskill power coolmaster 850+ gold i am trying to "intstall" two gpus on the board. 3070+1080 I have tried all the possible combinations but nothing came through. 1 pcie slot 3070/1080 the build boots only after the battery is off. 3 pcie slot 3070/1080 the build boots only after the battery is off. no boot with the gpus on the boad at the same time. not even the mouse and keyboard are getting a power on!! upgraded the bios to 2.1, nothing again. still trying to figure it out. any help would be usefull. thanks in advance!! |
Replies:
Posted By: goloma13
Date Posted: 11 Dec 2021 at 6:08pm
| i tried another combination of gpus (1080+166s) but still i am not getting a boot. |
Posted By: Xaltar
Date Posted: 11 Dec 2021 at 7:34pm
Do you mean it only posts after removing the CMOS battery? It shouldn't be doing that. If you are removing and replacing the CMOS battery try using the board without it installed. If the board works fine without the battery then the battery could be damaged/faulty and causing issues. ------------- 
|
goloma13 wrote:Posted By: goloma13
Date Posted: 14 Dec 2021 at 4:28pm
|
thanks for the advice. i will try it. i also tried another psu on the build with the exact same results. |
Posted By: goloma13
Date Posted: 14 Dec 2021 at 4:46pm
| i have just tried it. the buld does not turn on. the led of the mobo it does not turn on when i power on the psu. i am afraid that the mobo is faulty or just the mobo cannot hudnle 2 gpus on.... |
Posted By: Xaltar
Date Posted: 14 Dec 2021 at 7:29pm
|
If possible I would return it, just to be on the safe side. There is no sense in taking risks with new hardware IMO, the worst that can happen is that they test it and tell you it's working fine then send it back to you. Good luck. -------------
|