Print Page | Close Window

H510 Pro BTC+ without video output

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=19949
Printed Date: 05 May 2024 at 7:15am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: H510 Pro BTC+ without video output
Posted By: TxZeta
Subject: H510 Pro BTC+ without video output
Date Posted: 15 Dec 2021 at 5:15am
Hi the motherboard starts, ventilator of CPU starts, but no video output its on.
No beep on the speaker, with or without RAM, with or without GPU. Only with the CPU there are no beeps but the fans work. If I put a GPU in the first slot the LED does not turn on, testing both HDMI and VGA on the GPU. Tested with another old graphics card but also without a signal. Tested with the built-in HDMI and there is no signal either. Tried to remove the battery for more than 1 hour and use the pin to erase CMOS but no change. Help please. The CPU is supported right? according to the documentation it is, and it has integrated graphics.
Please help.

Kingstom 8GB DDR4 2666
Celeron LG5925



Replies:
Posted By: TheBrow
Date Posted: 16 Dec 2021 at 2:00am
This happened to me first time.

I added GPU (3060ti) to slot closest to CPU (over the SSD) - make sure its properly powered - then HDMI goes into GPU.

Booted straight to BOIS after that.

Now it doesnt recognise my WD SSD. FML ha.


Posted By: TheBrow
Date Posted: 16 Dec 2021 at 2:00am
Id also change your HDMI cable



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net