EPYC3451D412-2T reboot loop after bios udate
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=21111
Printed Date: 22 Dec 2024 at 11:53am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: EPYC3451D412-2T reboot loop after bios udate
Posted By: heiningair
Subject: EPYC3451D412-2T reboot loop after bios udate
Date Posted: 16 Jan 2022 at 7:23pm
Hi,
I recently purchased a new EPYC3451D412-2T mainboard.
When I first started the board (with IPMI connection), I was able to access the IPMI gui and everything seemed to work. Sadly I couldnt access the BIOS settings after powering on, so I tried to update the bios via IPMI gui.
I used the bios file like described here:
https://www.asrockrack.com/general/productdetail.asp?Model=EPYC3451D4I2-2T#Download" rel="nofollow - https://www.asrockrack.com/general/productdetail.asp?Model=EPYC3451D4I2-2T#Download
Unfortunately the bios update didnt seem to work and didnt finish (the window was showing processing status from time to time but never finished).
Since that time I cant reach the IPMI gui anymore and I am stuck in a reboot loop. I can see in my network status, that IPMI is connecting for a few seconds. While a single power cycle I can even establish a connection with impitool in this ~5 to 10 second time window. Then it starts over and the connection is lost again.
Is there any way to get around this issue? Since there are no jumpers available to currently disable IPMI I cant come up with any solution to this.
I hope someone is able to point me to the right direction?! thanks in advance!
|
Replies:
Posted By: threadzipper1957
Date Posted: 14 Mar 2022 at 11:55pm
For the products fromn ASRock Rack, please use the support form
https://event.asrockrack.com/tsd.asp?ln=en" rel="nofollow - https://event.asrockrack.com/tsd.asp?ln=en
When using a gmail account, plese check your spam folder
-------------
Kind Regards
|
|